camdensc
New member
- 35
- 0
- 0
- Location
- Camden, SC
Can anyone advise the proper way to test a new gp relay while it is out of the vehicle? Would you use a jumper cable from positive battery post to top lug, then ground out one of the small posts? My gp control card went bad, and I tried to wire the bypass, and it still didn't work. I purchased a new relay from NAPA (looks different than original) but still nothing. The gp's work, I jumped the relay and it started right up, so I need to test the relay, now that both the old and new are out.
I have read as many of the gp relay posts as I can find, but did not find mention of how to test it out of veh.
Thanks
I have read as many of the gp relay posts as I can find, but did not find mention of how to test it out of veh.
Thanks