hub flip

[rizzo]

anyone know how much the wheel gets pushed out when you do a hub flip?

 

[Pinkie]

I believe if you take a measrument of the front wheels and add the difference from the inside dual or subtract it from the outside dual you should be able to get an accurate reading. In other words you will have to do some measuring but the rears should track with the front wheels.

Thanks,

J.R.

 

[BFR]

you should gain 10.25" between wms when you flip out, so I would wager 5 1/8" per side....

 

[the glassman]

i use the top loader rockwells on my rockcrawler and we flip the rear hubs out and it matches the front width