Chagawaga
Member
- 40
- 3
- 8
- Location
- Midland TX
I just bought me a 1993 HMMWV that ran perfect. I took it to Avis lube changed the oil filled it with diesel ( the fuel gauge was 1/4 but it too 20 gallons. Lesson number 1) drove it around perfect.
Left it for two days now it cranks but wont start. I jumped the batteries and kept trying to crank to no avail. I am no diesel mechanic but things I tried:
1-Cracked fuel line to see if fuel is getting there. ( two rubber tubes have fuel but metal o e on i jectoe head doesnt. Whats that anyway?)
2- traced line back to the " carburetor equivalent " just where it feeds the cylinders, it had flow when cranking but just a little. Is that okay?
3- did continuity check on one glow pluck and it checked good.(voltmeter between cable and glow plug). I can see voltage dropping down when wait light is on so I think they are good.
Its 40 degrees outside ( i read about diesel becoming gel like in cold weather)
4-There is no smoke when I crank.
Help please.
Left it for two days now it cranks but wont start. I jumped the batteries and kept trying to crank to no avail. I am no diesel mechanic but things I tried:
1-Cracked fuel line to see if fuel is getting there. ( two rubber tubes have fuel but metal o e on i jectoe head doesnt. Whats that anyway?)
2- traced line back to the " carburetor equivalent " just where it feeds the cylinders, it had flow when cranking but just a little. Is that okay?
3- did continuity check on one glow pluck and it checked good.(voltmeter between cable and glow plug). I can see voltage dropping down when wait light is on so I think they are good.
Its 40 degrees outside ( i read about diesel becoming gel like in cold weather)
4-There is no smoke when I crank.
Help please.