Hydroboost question

[Drock]

So I skimmed through the many threads on this subject, but I have a question? While shopping online I noticed Autozone lists one ("with a rectangular bracket"). The one on my M1028 has such a bracket, so is this the one I need to get? Or can I simply swap my bracket over to any new one? Here's a link to what I'm talking about.....http://www.autozone.com/brakes-and-...ring=search&isIgnoreVehicle=false&model=power

 

[Barrman]

Yes, that bracket can be swapped out. There is a C clip that has to be removed and a 1-7/8" open end wrench to pull the nut off.

 

[cucvrus]

Don't forget your push rod and the sprag spring washer need to be reuse on the new one also.

 

[Chaski]

The socket for the oddball nut is a Kent Moore J-29192. If I planned on doing more than one hydroboost a decade I'd probably buy one, but they are spendy. I used the open end wrench method last time I did one.