• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Hydrolocked, big repair ahead.

Gcelevator

Well-known member
Steel Soldiers Supporter
489
697
93
Location
Fort Lauderdale, Florida USA
Retiredwarehouse is a stand up guy and I bought stuff from him and he was so helpful. Try to pm him again and if you buy it from him he will probably be there to answer your questions.
what did you use for body lift? I bought 12 of the upper mounts that I was going to vulcanize and stack
I bought 12 hockey pucks. Works perfect. Might change it in the future as does not match the size of the original body mount. I also thought about making it out of starboard. As of now it works.
 
Last edited:

Mogman

Moderator
Staff member
Moderator
Steel Soldiers Supporter
6,887
9,539
113
Location
Papalote, TX
Retiredwarehouse is a stand up guy and I bought stuff from him and he was so helpful. Try to pm him again and if you buy it from him he will probably be there to answer your questions.
what did you use for body lift? I bought 12 of the upper mounts that I was going to vulcanize and stack
I have been using this guy REAL HAPPY with his stuff, will build many different Dia., thicknesses and hole size to order.
https://www.mikellisbodylifts.com/shopmiscellaneous/hummer-h1-2-body-blocks
eBay link
 

Gcelevator

Well-known member
Steel Soldiers Supporter
489
697
93
Location
Fort Lauderdale, Florida USA
I have been using this guy REAL HAPPY with his stuff, will build many different Dia., thicknesses and hole size to order.
https://www.mikellisbodylifts.com/shopmiscellaneous/hummer-h1-2-body-blocks
eBay link
Good to know. Seems good material. 👍
 

Gcelevator

Well-known member
Steel Soldiers Supporter
489
697
93
Location
Fort Lauderdale, Florida USA
I have been using this guy REAL HAPPY with his stuff, will build many different Dia., thicknesses and hole size to order.
https://www.mikellisbodylifts.com/shopmiscellaneous/hummer-h1-2-body-blocks
eBay link
So i will assume the rectangles are for the hood lift.
 

Maxjeep1

Well-known member
Steel Soldiers Supporter
1,338
1,914
113
Location
Las Vegas Nevada
I bought 12 hockey pucks. Works perfect. Might change it in the future as does not match the size of the original body mount. I also thought about making it out of starboard. As of now it works.
I got the new upper mounts for 8.00 dollars from AMGeneral and after I ordered them they went up to like 30.00
 

Gcelevator

Well-known member
Steel Soldiers Supporter
489
697
93
Location
Fort Lauderdale, Florida USA
I got the new upper mounts for 8.00 dollars from AMGeneral and after I ordered them they went up to like 30.00
Yeah, they have lost total respect for our money jajaja. I might replace the ones i used in the future, at least the rear ones as they look funny on the truck not matching the original mounts.
 

Maxjeep1

Well-known member
Steel Soldiers Supporter
1,338
1,914
113
Location
Las Vegas Nevada
Yeah, they have lost total respect for our money jajaja. I might replace the ones i used in the future, at least the rear ones as they look funny on the truck not matching the original mounts.
I thought the stock options were the best for the money and my thinking was if one is good two is better. Lol
 

Mogman

Moderator
Staff member
Moderator
Steel Soldiers Supporter
6,887
9,539
113
Location
Papalote, TX
The parts TM does not show a gasket, I doubt you can get a civi cross for the pump as it has a vent nipple that civi vehicles do not have.
 

WOLF DOG

Active member
70
135
33
Location
Eastern Shore MD
I have been using this guy REAL HAPPY with his stuff, will build many different Dia., thicknesses and hole size to order.
https://www.mikellisbodylifts.com/shopmiscellaneous/hummer-h1-2-body-blocks
eBay link
If you drill accurately a 7/16" bolt will surely go in a hole bored with a 7/16" drill bit
 

REF

Active member
Steel Soldiers Supporter
117
127
43
Location
Porterville Calif
I could not find that gasket in the TM, But I could not stop the exhaust leak. The gasket shown is a Fel pro 60718 / Mahle F7507 / Victor-Reinz 711365500.I went to rockauto.com and looked at a 98 hummer H1. Its a 2 3/32" gasket, the metal lip on the flat side fits tight into the cast neck (turbo down pipe) and the bevel faces the pipe.
Note: can be a bear to get started strait into the cast without bending the lip -- buy 2
 

Gcelevator

Well-known member
Steel Soldiers Supporter
489
697
93
Location
Fort Lauderdale, Florida USA
I could not find that gasket in the TM, But I could not stop the exhaust leak. The gasket shown is a Fel pro 60718 / Mahle F7507 / Victor-Reinz 711365500.I went to rockauto.com and looked at a 98 hummer H1. Its a 2 3/32" gasket, the metal lip on the flat side fits tight into the cast neck (turbo down pipe) and the bevel faces the pipe.
Note: can be a bear to get started strait into the cast without bending the lip -- buy 2
thanks man. will order right now.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks