• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

I documented my MTV 3116 water pump change.

GeneralDisorder

Well-known member
Steel Soldiers Supporter
2,081
5,316
113
Location
Portland, OR
Your confusing electrical readings (5v, dropping to 4.5v) after disconnecting the 12v are probably capacitors discharging from electronics. Had you waiting a bit I bet it would have dropped to zero. Things like the voltage regulator on the alternator likely have internal capacitors that don't immediately drain. One thing you can do on vehicles is disconnect both the positive and negative battery terminals and touch them together to discharge the various capacitors - or turn on the lights. On the later A1 trucks with the battery disconnect relay and the LBCD it is important to note that the LBCD has HUGE capacitors in it that will hold quite the charge in them assuming they are good. You can actually turn on the lights on the truck for several seconds with the batteries completely disconnected if they are good and charged. Something you NEED to be aware of on later 3126b and C7 trucks.
 

RRaulston

Well-known member
227
551
93
Location
Sahuarita, Arizona
Your confusing electrical readings (5v, dropping to 4.5v) after disconnecting the 12v are probably capacitors discharging from electronics. Had you waiting a bit I bet it would have dropped to zero. Things like the voltage regulator on the alternator likely have internal capacitors that don't immediately drain. One thing you can do on vehicles is disconnect both the positive and negative battery terminals and touch them together to discharge the various capacitors - or turn on the lights. On the later A1 trucks with the battery disconnect relay and the LBCD it is important to note that the LBCD has HUGE capacitors in it that will hold quite the charge in them assuming they are good. You can actually turn on the lights on the truck for several seconds with the batteries completely disconnected if they are good and charged. Something you NEED to be aware of on later 3126b and C7 trucks.
Thats interesting about the capacitors. I always thought my disconnect switch cut all power to the truck. It appears it only cuts half..? Oh well, zero drips on the new pump. I thought the price was reasonable for a genuine CAT part as well..
 

GeneralDisorder

Well-known member
Steel Soldiers Supporter
2,081
5,316
113
Location
Portland, OR
Thats interesting about the capacitors. I always thought my disconnect switch cut all power to the truck. It appears it only cuts half..? Oh well, zero drips on the new pump. I thought the price was reasonable for a genuine CAT part as well..
The FMTV disconnect switches that I've worked with do cut both the 12v and the 24v positive leads.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks