Today's lesson.
Installed drivers low door hinge.Reset fit on door. Played with striker latch. Door good to go but need to build inside door panel.
Cleaned out a bay at the shop and moved the truck in.
Started looking for the brake air leak. Coming from under the driver side front area.
Found 4 cut hoses ? 3 =3/8" and 1 + 1/2". Oh and 2 wires. TL 202 and TL 02 ?
![IMG_3329.jpg IMG_3329.jpg](https://www.steelsoldiers.com/data/attachments/451/451865-18d8b5ea3f404e78b703ab21d0026a69.jpg)
Went looking for the 3 valves ? Found only 2 ?
![IMG_3334.jpg IMG_3334.jpg](https://www.steelsoldiers.com/data/attachments/451/451867-80090bc0c1e84651f41aaec264c6179c.jpg)
Will sent me a photo of what I should see. One photo + 1000 words ! Thanks Will !
Somebody cut the lines and took off the wires and stole my valve ! Bastards. Any body know if the valve is used by the OTR trucks ?
Next question is can I use splices or do I need to run new lines all the way back to the rear axle ?
Thanks Randy