I Need a Jump Start for M923 in CNY

[D3M0N]

Good afternoon All,
I was wondering if there was anyone available to give my 923 a jump. I accidentally left the instrument panel lights on and it drained my batteries to the point where it will not turn the engine over. The batteries still have juice just not enough. If anyone in the CNY area has a slave cable or another means of jump starting, I will gladly compensate you for your time! Also any advice would be greatly appreciated.

Thanks,
AJ

 

[doghead]

Call me, pm sent.

 

[tigger]

You can unhook the batters and charge them 1 at a time with a car! till they are all charged! If all else fails!

 

[av8or]

I'm way to far, but you could connect your car to a battery charge for an hour then connect to a battery on the other pair of batterys charge it and get it going. May take awhile but your car can charge up as may batterys as needed. Bob

 

[doghead]

I've made a few calls and have a couple guys in the Syracuse area ready and waiting to assist.

Just waiting for contact from the op.

 

[doghead]

Just spoke to d3mon, and passed on a number for a guy much closer, that should be able to assist.

Looking forward to an update later.

 

[seano11]

I usually just hook my pickup to my truck let all the battery's charge for 20 min and then crank her over. Making sure to disconnect the jumper cables as soon as the truck starts