I need Dualmatic parts for my 5-ton locking hubs

[dma251]

I have a set of 5-ton Dualmatic hubs that I am restoring, and I'm wondering if there is anything left out there for them or do I need to start fabricating....

I need the locking levers (2 long and 4 short levers for each hub) and I need the inner star-shaped splined drive gear that slips over the axle splines and the cams lock into to engage/disengage.

I can make both of these parts, but it would be sure be easy if someone has them on a shelf somewhere.

Here's a couple links to some smaller Dualmatic pages to give you an idea what I need. The levers look to be the same as mine, but I have 6 levers per hub.

http://robwolfe10.tripod.com/dualmatic_hubs.htm

http://www.cj-3a.com/restoring_dualmatic_hubs.htm

 

[Recovry4x4]

Pics please!

 

[Knucklehead]

dma251, IHC 4x4 and 6x6 trucks used that type of free wheeling hubs from about 1955- 1985. A Navistar dealer may have a line on those parts you need.

 

[dma251]

Here's some pics, they are totally disassembled right now and I'll get them looking and working nice over the next few weeks as I get time. They were pretty rough when I got them, but I guess they're salvagable.

Any suggestions on how to fix these up I could use the advice.

 

[ken]

I wonder if navastar would carry the whole hubs?