I need help finding info on this m35

[maxxplanck]

Good Times............ Had fun out there, I say we just drive it home. Hey thats one good looking guy standing in between the trucks

 

[Heath_h49008]

Does she still have the mill and lathe in the back?

 

[F18hornetM]

PM jatonka. Thats his truck I believe.


The 5ton versions are the m811 and m944. The trailer version does not have an M#.


By the way I am looking for the trailer version

Ft. Meade jsut sold onea couple weeks ago, and I know where there is one at a junk yard in Preston, md..in very nice shape. probably to far from you, but if you want info on it PM me.

 

[Blind Driver]

gullwing

Looks like a big roach coach

 

[ODdave]

Ft. Meade jsut sold onea couple weeks ago, and I know where there is one at a junk yard in Preston, md..in very nice shape. probably to far from you, but if you want info on it PM me.

I belive I will be interested. First I need to evte the condition of this one then go from there, I did see a few things that I would like to replace/find for this one. If you are interested in grabing and shipping them I could pay you for your time (and the parts of corse)

 

[ODdave]

Does she still have the mill and lathe in the back?

No, just has the welder/ generator & the heater back there.

 

[Heath_h49008]

I know where we can get the parts if they are the same as the 5ton batwings.

But you know who I'm talking about...

 

[F18hornetM]

The one in Preston..a trailer model..has everything in it, lathe, press, drill press, and welder..Looks pretty complete. At the time I asked the guy he wanted $5500 for it..i would love it, way cool..but I dont really have a use for it. Already have a mill and lathe and it woulod just sit..so couldnt justfy $5500 on it. plus would have to buy a tractor to pull it..would be a cool piece though..

 

[Derrickl112]

The one in Preston..a trailer model..has everything in it, lathe, press, drill press, and welder..Looks pretty complete. At the time I asked the guy he wanted $5500 for it..i would love it, way cool..but I dont really have a use for it. Already have a mill and lathe and it woulod just sit..so couldnt justfy $5500 on it. plus would have to buy a tractor to pull it..would be a cool piece though..

If someone wanted the gullwing box, I would buy the trailer... WOuld you happen to have any pictures that you could PM me?

 

[F18hornetM]

Im picking up a M813 from meade on tuesday. Im sure we'll need some parts for it, heater etc..so when i make a trip to Preston, hopefully in next couple weeks, ill take some pics. It looks just like the one somebody posted here.

 

[jatonka]

Any of the the trailer mounted shop sets are a heavier unit and all the main machines are much larger, unfortunately for owners of the shop set No. 2, which are the only units that used the machines that are issued in them. Hand tools, good to go........ lathe, valve grinder, air compressor, press, drill press, etc. are all larger than what we need.

 

[ODdave]

J, do you happen to know the specs of the machines that where in the 2.5ton shop trucks? Who made which machine and what size/model they where? I am still looking but not finding much.

 

[jatonka]

Drill press, valve grinder, portable grinders, portable drills, bench grinder are all Black and Decker. Lathe was a 9" throw, by different manufacturers. I have model numbers at my shop, will be glad to share them. I am still searching for the hydraulic wall mount press. JT

 

[Bob H]

opcorn:

 

[ODdave]

UGH, B&D machinery. Thats gonna be hard to find. I will probably outfit it with different (better) machines if I end up likeing the truck enough. J, model #'s and pictures would be great though so I can use them for comparison. Thanks

Im thinking,
Lathe= southbend or atlas
valve grinder= souix
mil= ?????
grinder= baldor
vice= shoulda bought one from Eric........damit

 

[maxxplanck]

you also need a side door and engine and alt. , i noticed they were missing also....

 

[mcmullag]

trailer version

Here are some pics of the trailer version, just for fun to look at, or if it helps..... I think I saved these pics from a GL auction that occurred several moons ago.

 

[319]

UGH, B&D machinery. Thats gonna be hard to find. I will probably outfit it with different (better) machines if I end up likeing the truck enough. J, model #'s and pictures would be great though so I can use them for comparison. Thanks

Im thinking,
Lathe= southbend or atlas
valve grinder= souix
mil= ?????
grinder= baldor
vice= shoulda bought one from Eric........damit

Shoulda is right! And I shoulda sold them for more money!

Actually, the B&D equipment of that era was pretty decent quality stuff. Not that it was quality that mattered to the Gov't.
None the less, Sioux is, and was, a better valve machine.

 

[O.D. Fever]

Hey Dave if its near me and you need help, just ask.. Joe

 

[ODdave]

Well Made it home today with the truck . Drove out there to bleed the brakes out and hook up the air line, On the way out I decided the roads where clear enough to try it. It took 2 hours but we made it !!!! By the time we got home though it was to dark to take pics with my phone so I will have some more when I get back out to it.

I will admit there where a few scarry turns though, Towbars in the snow will be avoided at all cost for me any more