dmilkman589
Member
- 181
- 1
- 18
- Location
- troy, ny
i am thinking 33 inch tire. so what lift will go best with this? 2 or 4? can i have some photos?
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
What kind of wheels did you have on the Blazer?Ive personally ran 35's on stock suspension with just fender trimming. the pics I have posted are civy rigs I have had, the first is a 78 longbed with 3 inch body lift and 33's, the third picture was in the middle of a suspension lift with severe cutting of the fenders, up front was 9 inches of lift total, rear was 3. the forth is a 35 inch bogger in the rear at stock ride heigth, 5th is the same with 3 inch body lift. #6 is my K5 shortly after purchase nosed up to the longbed, the k5 sat on 35's with 4 inches lift, and the longbed, still 37's with 3inches body lift and 6 inches suspension lift and severe fender cutting. and the last 3 are the k5 with 9 inches of suspension lift and 37' tires. Granted all these pics are generally bigger than what you are doing, but I hope it helps you to scale what you are looking for.
if you were referring to these, they were a 37" toyo open country mud terrains on les schwab special steel wheels similar to the pro comp 97 series, the rims were 17 inch tall, 10 inches wide, unfortunately I cant remember the backspacing, an educated guess is 3.5-4.5.What kind of wheels did you have on the Blazer?
Thanks
I just installed a 2.5in Pro Comp lift with the heavy duty front 4 leaf springs and RS9000 shocks with blocks on the back. The tires are General Grabber AT2's 33x12.5x15 on the stock rim.
That thing ought to be in a parade or something! Should be perfect for running around on Halloween scaring kids!I just installed a 2.5in Pro Comp lift with the heavy duty front 4 leaf springs and RS9000 shocks with blocks on the back. The tires are General Grabber AT2's 33x12.5x15 on the stock rim.