I REALLY need a set of 5t double beadlocks

[tacoma]

I can't find any! Anyone know a good place to start looking? I'm not asking anyone to find them FOR me (though I would be very appreciative!), but I have no idea where to find the big stuff, and I figure y'all do...


The hunt continues! Thanks......

 

[red devils dude]

m1075 has some you

 

[red devils dude]

m1075 has some send him a PM

 

[tacoma]

cool, will do! Thanks man!

 

[40grit]

make sure they are the older style with more "beadlock"bolts...the newer ones are thinner metal, iirc
also, I had heard a bunch of the HMMT rims are 'posed to hit the market soon, they area the same 5T pattern, only alum...mucho lighter

 

[M1075]

I don't know if have the older or newer style you mention, but you can see pics under the other post.

HEMTT rims would be sweet. I'd like to have a set of those!

 

[Jones]

If you have your heart set on beadlocks then check with Barstow Truck. They have 'em but they try to hold them back for M-900 series trucks they build. Otherwise, have you considered Budd 20X10 three-piece wheels? Hayes made a very similar wheel for the HEMTTs which I have a machinist's drwg. of for reference. I ended up with a set of Budds and they're what the truck wrecking yards refer to as "garbage truck wheels" because that's what they're mostly used on out here.

Hope this helps, Jones

 

[Lee Alessi]

so the "garbage truck" wheels are 10 hole?

 

[Jones]

Yep, 10 hole with countersink on both sides of the lug stud hole so as to run them deep dish in or out, 10" wide between flanges and as close as I can figure, with about a 4" to 4 1/2" offset when measured from the wheel centerline. Hayes' rim for the HEMTTs has a 3" offset but the Budds will put my wheel tracks almost on top of each other which is what I was shooting for. See drwg.
Jones

 

[motorolanut]

Hey I need a set of Seven Super Single Combat Rims as well for my 813, anyone bueller? bueller?

 

[micky]

I have a set listed in classifieds.