Third From Texas
Well-known member
- 2,777
- 6,529
- 113
- Location
- Corpus Christi Texas
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
If I had a Dollar for Every Time....
- Thread starter Third From Texas
- Start date
- 1,006
- 1,905
- 113
- Location
- Wauchula, FL
So true! 
- 882
- 525
- 93
- Location
- tucson AZ
- 10,498
- 6,631
- 113
- Location
- Camp Wood/LC, TX
So what happens when he sells someone generic 3/8” J30R7 fuel/emission hose and someone clueless installs it on a fuel injection system that requires J30R9 high pressure hose?
- 2,076
- 5,308
- 113
- Location
- Portland, OR
A fire.
- 145
- 152
- 43
- Location
- Parsons, TN.
Years ago, when I moved to the town I live in now, and was working on a few mules, trailers, and 1/4 ton trucks. I went into the NAPA store and presented them with a seal I needed. The kid behind the computer asked what it fit. "Look I'm not trying to be a smart ass, but if I told you, you still wouldn't know and you're not going find it in there." I did tell him it was for a military vehicle. After a while they learned to measure the parts I needed.
They got so good at meeting my needs, I went in one day and the owner waited on me. He asked, "What kind of Army truck does this fit?" I laughed and said, "It's a seal for the gearbox on my bush hog." He got a laugh too as he was reaching for the calipers and parts book.
Another time they ordered a fuel filter for a mule. Somebody along the way got the part number backward. When I went to pick it up, they presented me with a filter that was about 6 inches in diameter and a foot long. It fit some kind of Caterpillar tractor. We got a good laugh from that one too. Good guys at NAPA, very accommodating!
They got so good at meeting my needs, I went in one day and the owner waited on me. He asked, "What kind of Army truck does this fit?" I laughed and said, "It's a seal for the gearbox on my bush hog." He got a laugh too as he was reaching for the calipers and parts book.
Another time they ordered a fuel filter for a mule. Somebody along the way got the part number backward. When I went to pick it up, they presented me with a filter that was about 6 inches in diameter and a foot long. It fit some kind of Caterpillar tractor. We got a good laugh from that one too. Good guys at NAPA, very accommodating!
SCSG-G4
PSVB 3003
- 5,379
- 3,413
- 113
- Location
- Lexington, South Carolina
Ferro needs to post his NAPA story here.
- 538
- 849
- 93
- Location
- Texas Hill Country
Our local NAPA folks are great at helping us find the right bits and pieces and making our hoses, too—
- 4,811
- 746
- 113
- Location
- Liberty Hill, SC
Ok I will.
Years ago I was rebuilding my M37's brake system. I looked up all the Napa numbers and went to the local store, I hadn't trained them yet as I had just moved to the area.
I go up to the counter and say hi, I need a part, and I have the napa number.
Kid goes, make and model?
It isn't in there trust me.
Well let me try...
Sure knock yourself out. 1953 Dodge M37 3/4 ton weapons carrier with a 230 flathead inline six with waterproof ignition system, 24v.
Uhhhhhhhhhhh
With a smug look on my face- Told you
Finally admitting defeat- what's that number?
His fingers hover shaking slightly over the number pad.
I say, are you ready?
He says yes.
I go, "1"
He hits it. And waits. I stand quietly. Then he looks up, and the rest he says?
That's all I say.
He calls BS, I say hit enter. Skepticaly, he does.
Oh, it's a master cylinder rebuild kit for a 1936 Plymouth sedan. And it says we have 3 on the shelf!?!
Yep, I'll take all 3.
$27.95 each
- 7,769
- 19,877
- 113
- Location
- Charlotte NC
- 91
- 182
- 33
- Location
- Rochester NY
One time.....one single time.....I said "1968 M35a2, natural aspirated, 6x6"
Guy behind the counter acted like it was in the system. Went and grabbed fuel filters.
I asked him about it, turns out his dad uses several Deuces as farm trucks. He knew the part. LOL
Guy behind the counter acted like it was in the system. Went and grabbed fuel filters.
I asked him about it, turns out his dad uses several Deuces as farm trucks. He knew the part. LOL
- 538
- 849
- 93
- Location
- Texas Hill Country
Searching for "1" at NAPA parts online still brings up the master cylinder rebuild kit—
biscuitwhistler37
Well-known member
- 295
- 865
- 93
- Location
- Michigan
In another life while I was a service manager for a used car dealer, I had to order a transfer case bearing for a Chevy pickup, kid on the phone asked me if it was 2 or 4 wheel drive..... Almost as good as ordering windshield wipers and getting the same question.
canadacountry
Well-known member
- 239
- 516
- 93
- Location
- Canada
@Adrok got to love it when you run into someone who doesn't even need to physically look up at all if you know what i really meant there?
even then umm well geeze yeah when you keep going back many to the same small food store (think just a few employees if not sometimes only one all day long) for quite a long time its not too much of a surprise to once in awhile suddenly get told the total price for my bag worth of items before i even managed to put one single thing onto the countertop in front of the cashier! and thats considering the blank back of a 1kg freezer bag of goat pasta looks exactly the same as the blank back of a 1kg freezer bag of veal-cheese pasta so yeah you can say they know too well what i usually eat .. and don't ask me about that one particular parma lady sometimes going "what? no chocolate??" when I buy something without getting at least one minicake of some sort too - hey don't laugh too much ok???!
even then umm well geeze yeah when you keep going back many to the same small food store (think just a few employees if not sometimes only one all day long) for quite a long time its not too much of a surprise to once in awhile suddenly get told the total price for my bag worth of items before i even managed to put one single thing onto the countertop in front of the cashier! and thats considering the blank back of a 1kg freezer bag of goat pasta looks exactly the same as the blank back of a 1kg freezer bag of veal-cheese pasta so yeah you can say they know too well what i usually eat .. and don't ask me about that one particular parma lady sometimes going "what? no chocolate??" when I buy something without getting at least one minicake of some sort too - hey don't laugh too much ok???!
SCSG-G4
PSVB 3003
- 5,379
- 3,413
- 113
- Location
- Lexington, South Carolina
You are a 'regular' in more ways than one!
- 2,076
- 5,308
- 113
- Location
- Portland, OR
I'm pretty sure of one thing - if I were the clerk I would recognize the "goat pasta" regular customers also. Can't be that many of them......
canadacountry
Well-known member
- 239
- 516
- 93
- Location
- Canada
@Mullaney are you laughing too much that your feet are sticking upward instead because the chair has flipped backward? heh!
- 7,769
- 19,877
- 113
- Location
- Charlotte NC
- 2,076
- 5,308
- 113
- Location
- Portland, OR
I want a dollar for every time someone asked me about my Unimog. 
- 538
- 849
- 93
- Location
- Texas Hill Country
Exactly. It surprises me still when folks ask me that. I need to make up a better response—I want a dollar for every time someone asked me about my Unimog.