bubba_got_you
New member
- 1,175
- 6
- 0
- Location
- st,petersburg Florida
It needs a new motor but other than that it only needs some misk parts and a new wiring harness. I am just wondering what it is worth. 
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
If I where to sell it what would you give me?
- Thread starter bubba_got_you
- Start date
bubba_got_you
New member
- 1,175
- 6
- 0
- Location
- st,petersburg Florida
not for sale ..............yet
Capt.Marion
Active member
- 1,811
- 15
- 38
- Location
- Atlanta, GA
How bout some pitures of the bed? That's what I'm in the market for.
bubba_got_you
New member
- 1,175
- 6
- 0
- Location
- st,petersburg Florida
Well I don’t have any yet I will tomorrow. i will say one thing it is used. 
bulldog_mack13
3/3 ACR
- 2,968
- 34
- 0
- Location
- Colo Springs, CO
1,000
Capt.Marion
Active member
- 1,811
- 15
- 38
- Location
- Atlanta, GA
Re: RE: If I where to sell it what would you give me?
I can certainly understand that! The problem is mine was used too much as a swimming pool and rain water collector...bubba_got_you said:Well I don’t have any yet I will tomorrow. i will say one thing it is used.
- 323
- 5
- 18
- Location
- North Dallas, TX
RE: Re: RE: If I where to sell it what would you give me?
I think a grand is about right. You might get more parting it out. However, if you find the right person locally, you could get a little more. Can't really see the condition of the top though.
I think a grand is about right. You might get more parting it out. However, if you find the right person locally, you could get a little more. Can't really see the condition of the top though.
- 10,865
- 758
- 113
- Location
- Appomattox, VA
RE: Re: RE: If I where to sell it what would you give me?
Don't part it out, looks good despite the lack of an engine. I know it's always tempting to part something out, since you'll get more for it than if you sell whole, but a lot of parts (small parts, mainly) get wasted in the process, and you kill a survivor. Keep her together and save a piece of history, don't make history out of the pieces...
Don't part it out, looks good despite the lack of an engine. I know it's always tempting to part something out, since you'll get more for it than if you sell whole, but a lot of parts (small parts, mainly) get wasted in the process, and you kill a survivor. Keep her together and save a piece of history, don't make history out of the pieces...
bubba_got_you
New member
- 1,175
- 6
- 0
- Location
- st,petersburg Florida
Re: RE: Re: RE: If I where to sell it what would you give me
Well it does have an engine but it threw a rod through the oil pan but the rest of it is vary solidmaddawg308 said:
Bozor1000
New member
- 482
- 0
- 0
- Location
- Riverside, CA
RE: Re: RE: Re: RE: If I where to sell it what would you giv
I would agive you about 1000 for it!
I would agive you about 1000 for it!
JeepMan
New member
- 451
- 1
- 0
- Location
- Upstate New York
Re: RE: If I where to sell it what would you give me?
Too much in my opionion.bulldog_mack13 said:
M715ForLife
New member
- 121
- 0
- 0
- Location
- Exeter
Nothing, give it to me for free!
dc3coyote
New member
- 1,393
- 19
- 0
- Location
- Chattanooga TN
Well now if free is the going rate, I can take it off your hands in about a hour 
sak00
Member
- 360
- 1
- 18
- Location
- Brooksville, FL
Yea, I agree. Free and I'd be there quick too! Seriously though, I may be interested if the motor was fixable and she's not too rotted. $1000 is a bit high, but we could work something out. More info is definatly required though.
bubba_got_you
New member
- 1,175
- 6
- 0
- Location
- st,petersburg Florida
This is a 1953 m37 (i do have title) w/o/w it is in vary soled concision and is almost complete (some misk parts and the motor will need to be rebuilt it threw a rod through the oil pan but I think the block is ok) it is missing the generator carburetor distributor gas tank light switch and top draglink. The bed floor is going to need to be replaced. But other than that it is in good concision. I have already blasted and primed the front-end parts (hood fenders and stuff) and unbolted the bed so all you have to do is lift it off. The disassembly for rebuild has bean started (most of the hard work is done) and all you Have to do it finish it. Frame is vary soled and the cab floor has no rust threw. That’s all I can think of right now if I do more I will tell you. I will not be selling it till June but wanted to get the idea out there
bubba_got_you
New member
- 1,175
- 6
- 0
- Location
- st,petersburg Florida
the truck in the top pick is what you get but i have started the disassembly.
Attachments
Capt.Marion
Active member
- 1,811
- 15
- 38
- Location
- Atlanta, GA
Progress! Keep at it!
bubba_got_you
New member
- 1,175
- 6
- 0
- Location
- st,petersburg Florida
I am only selling this one because I am buying one that is in better concision (this one is in great condition but I found one that runs and is ready to go ) but seriously I would guess that this one could be done in a mater of months.
bubba_got_you
New member
- 1,175
- 6
- 0
- Location
- st,petersburg Florida
Also if you are thinking "great he took it apart and lost all the bolts and small parts" you are wrong I have all bolts in separate bags and marked to what they came off of and all small parts are in boxes. Like I said almost all the hard work is done for you
bubba_got_you
New member
- 1,175
- 6
- 0
- Location
- st,petersburg Florida
Also I forgot to mention that the front right leaf spring is broken, it will work fine for now but it needs to be fixed