• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

If they only woulda built it...CUCV RAMCHARGER

lewsterrett

New member
2
0
0
No Offense to you M-1009 guys..Just a dream of mine..

There is just something itimidating about seeing the Ram's Head on the Hood In OD comin at ya..here are some pics as i built my "CUCV RAMCHARGER"

<img src="http://home.comcast.net/~juan_martinez/ram1.jpg" border="0">

<img src="http://home.comcast.net/~juan_martinez/ram2.jpg" border="0">

<img src="http://home.comcast.net/~juan_martinez/patterns/camo.JPG" border="0">

<img src="http://home.comcast.net/~juan_martinez/patterns/camo2.JPG" border="0">

<img src="http://home.comcast.net/~juan_martinez/patterns/camo3.JPG" border="0">

<img src="http://home.comcast.net/~juan_martinez/patterns/camo8.JPG" border="0">

<img src="http://home.comcast.net/~juan_martinez/patterns/Bridge.jpg" border="0">

<img src="http://home.comcast.net/~juan_martinez/patterns/DBU.jpg" border="0">

<img src="http://home.comcast.net/~juan_martinez/patterns/Base.jpg" border="0">

<img src="http://home.comcast.net/~juan_martinez/at.JPG" border="0">


Finished..whew
<img src="http://home.comcast.net/~juan_martinez/IMG_0004.JPG" border="0">
 

steelsoldiers

Administrator
Staff member
Administrator
5,259
3,971
113
Location
Charleston, WV
Lots of great pics there. At first glance in your other post, I even thought it was a M1009 CUCV<img src="emoticons/icon_smile_blush.gif" alt="Blush">. Looks good, I bet you could bolt up a set of CUCV bumpers without too much difficulty. Keep up the good work.

Chris<img src="emoticons/icon_smile_cool.gif" alt="Cool">

1970 Kaiser-Jeep M35A2 w/w
1984 M1009 CUCV Blazer daily-driver
1985 M1009 CUCV needing engine, etc... GL project truck
 

cucv19652000

New member
1
0
0
if you were going to use it as a daily-driver and no towing/a slant 6 would be nice/ i had one in a 150 /smooth as butter and quiet as a honda
 

Dieselsmoke

New member
1,146
2
0
Location
CA/NV
Actually they did...kinda...I have a book somewhere around with a bunch of photos of the one that Dodge built when uncle sam was getting bids on the CUCVs, there's even pics of a Bronco CUCV!

_____________________
Bill
1967 Kaiser M35A2w/w
1967 Kaiser M109A3
19?? ?? M52A2 5 ton tractor needs a lowboy
1970 Ford M151A2
1970 AMG M151A2
1970 Ford M718A1
1986 M1044 HMMWV
1986 M1009 CUCV
1985 M1008 CUCV
a trailer for each vehicle.
shall I keep listing them???
 

Attachments

SrBenelli

New member
2
0
0
Location
Indian Trail/NC
I guess your site is down....all I see is a red "X". Looking forward to seeing your creation! <img src="emoticons/icon_smile_cool.gif" alt="Cool">
You're not alone in wanting a "military" Ramcharger, though. Two years ago, I bought a '79 Dodge Ramcharger with a 360/727 combo. I went out and bought a blackout light from a Dodge M-880, rifle mounts and a brand new CUCV antenna base with the trapizoid-shaped brush guard. Never did get around to doing the conversion.....
......anyone wanna buy a Ramcharger??? LOL

Steve
 

Attachments

McGuyver

Member
466
7
18
Location
Utah
How's this for an idea: a `77 Ramcharger (same year as the M880) with a `94 - `98 12 valve Cummins turbo Diesel (w/intercooler) and an NV4500 manual five speed tranny, mounted up to the stock NP203 transfer case and Dana 60 axles front and rear. Of course some modifications would have to be performed to get it to work, such as shortened drive shafts, redrilled bolt pattern on the 203 case, `91-`93 Cummins motor mounts, swapped over clutch and brake pedals, etc. It would be the ultimate Dodge CUCV!! <img src="emoticons/icon_smile_approve.gif" alt="Approve">
 

Dieselsmoke

New member
1,146
2
0
Location
CA/NV
A friend just got done putting a 12 valve in a M880 wasn't bad, but the suspension on the M880 sure needed some help. I helped out as much as I could in my spare time.
We also put a 12 valve in a '78 F350 4x4 which was so easy I couldn't believe it. As another side project I have an '86 F350 crewcab 4x4 that I'm putting a 24 valve into.
 

Attachments

hot rod deuce

New member
600
0
0
Location
Kasota, Mn
id just skip the 203 its kinda of a boat anchor, go for a 205
 

Attachments

Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks