Ingersoll Rand Gyro-Flo 125

[Ranger Dave]

just picked up this 19?? Ingersoll Rand Gyro-Flo 125. hasent been run in a long time.after some tuneup parts,cleaned the carb i finally got it runnin half way decent. now the started died. time for a new one. anyone know where i can get one?? its a 6v delco 1107010-93c..... what year is the comperssor??

 

[NDT]

Welcome to the forum. Looks 1960's vintage. I would take the starter to an old school auto electric shop. They should be able to rebuild it. Engine looks like a Continental Red Seal, also commonly used in forklifts.

 

[jimk]

Mine dates around 1956. Starter should be easy to find. Try ebay or your local Lincoln Welder service center.

https://www.steelsoldiers.com/showt...compressor-lubrication-info-wanted&highlight=


edit- my starter is 12V, charging is a modern Delcotron and it has a spin on oil filter

 

[Ranger Dave]

this one is older....

 

[RAHarden]

I know this is an older thread. I have an older 125 Gyro-Flo Ingersoll Rand vane compressor, with a G193 Continental engine. The compressor did work, but the engine was damaged when my cousin broke the intake manifold and left it sit outdoors in the rain. I know there some value in the parts, but if someone wants them, they may be free.