• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

injector help

bbf

Member
461
0
16
Location
port st lucie fl
i have a 250 cummims and i am trying to find witch type of injector is there the numbers that i pull off the motor cummims cant match there are 2 sets of number on the plate witch are 11160 and the a SO 57707 . i would like to know if it is a top stop add or dial inc
any help would be helpful
 

WillWagner

The Person You Were Warned About As A Child
Super Moderator
Steel Soldiers Supporter
8,539
2,758
113
Location
Monrovia, Ca.
Use the torque method. Adjust the injector first, then the valves on the same cylinder. Torque them to 68-72 in. lb. Easy way to tell if you have top stops or not, is to look down at the injector. If you can see the spring, you have a non top stop. If all you see is the flat top of the plunger, you have a top stop. You can set either injector using the torque method. Small cam engines like it that way.
 

Gamagoat1

Active member
746
44
28
Location
Kiowa, Colorado
bbf
Here is a picture of the top stop injctors. Looks like a castle nut on top. The non top stop has nothing but spring.
I've done mine like Will sugests and it works great.
 

Attachments

Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks