• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Install Muffler, Install Snorkel on Deuce

RAYZER

Well-known member
3,380
59
48
Location
sanford/florida
Thanks Don! I want one for the tractor! Also, you could run 1/4" hi trade rubber tubing off of barbed fittings at all of your cap vent locations, t everything into a main line that runs up the frame to the top of the air canister housing where it vents in via a tapped barbed fitting.
 

sandcobra164

Well-known member
2,999
295
83
Location
Leesburg, GA
I'm a huge fan of a muffled deuce. I don't have a snorkel but perhaps will try one in the near future. At idle, the muffler is not that noticeable but there's huge difference running down the road. I used a Donaldson 3" in and out "over the road truck" muffler. I couldn't keep the screen but it blends in ok painted flat black.
 

Attachments

Flyingvan911

Well-known member
4,709
158
63
Location
Kansas City, MO
I bought the big Walker muffler for my deuce but haven't installed it yet. I am thinking about the bullet muffler now. Much lower profile and won't interfere with the snorkel. I'll have to check out the classifieds.
 

ken

Active member
Steel Soldiers Supporter
2,479
25
38
Location
Houston Texas
I have a original equipment fording kit. I dont keep the snorkle on the truck because the tube deteriates in the weather. I have one unused spare tube but i like this design much better. I could leave it on year around.
 

joshs1ofakindxj

Active member
738
120
43
Location
SW PA
I don't know which mod I consider more valuable, adding some car bucket seats in the cab or adding a muffler.

There are several options for adding a muffler but I went the quick, easy, and cheap way with this pretty much bolt on set-up that fits behind the stock heat shield and eliminated the need for ear protection:

Jeggs: Moroso 94052 muffler $50
Napa: Two 3.5" muffler clamps $8, exhaust pipe connector 41893 $15

Note: Krylon Ultra Flat spray paint turns primer red on exhaust stack parts after awhile. Apparently Jeggs has a high temp OD green spray paint. I just used black BBQ spray paint from Walmart on my stack.
 

islandguydon

Well-known member
3,724
783
113
Location
Michigan
I finished the installation today. I got tired of the Coffee Can. I found myself at Tractor Supply. Got the last 3.5" flapper they had $8.45. At my age thats working smarter, not harder.

Thats 1 less thing to think about..!
 

Attachments

TCB

New member
4
0
0
Location
Marana AZ
I added a muffler from a local shop before leaving MN for a road trip to AZ- the sound before off of the cab over camper was too much for the 1800 miles- Does relocating the intake help that much too?
 

Attachments

islandguydon

Well-known member
3,724
783
113
Location
Michigan
I did everything I could to quiet mine down. The intake is loud all by it's self. I am guessing I cut the sound down by half doing both. I am a no body and just do what I think will help.

The intake was a fording concern as is the air compressor intake. I have to rout that to the air cleaner box next.

TCB, I like the spare tire on the front. Never seen that before, looks good and useful for pushing chit out of the way. :drool:
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks