• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

installing insulating in the cold not going to well...

richingalveston

Well-known member
1,715
120
63
Location
galveston/Texas
Other than moving to texas where it was 80 degrees for the last three days, I can only suggest getting a good propane fan heater to heat the inside of the truck by blowing it through an open window. You also want to store your material in your house for the night to get it to a working temp before moving it outside.
 

bikerted86

New member
20
0
1
Location
Livonia/Michigan
I did mine when it was about 20 degrees, I kept it inside then after cutting I would hold it infront of my turbo heater until it was sticky. I still had a couple pieces that didnt stick well.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks