Scooteerr
Member
- 313
- 0
- 16
- Location
- Toney, Alabama
Unless you mod your vehicle or just dont give a flying flip that is.....
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
That doesn't sound rapey at all. Does your Deuce have a sign for free puppies and naps?
It is dangerous. You posted a really good thread here kid, too bad it morphed into "Whats te best way to blow up my 6.2" Im also guilty as charged. You seem to have a pretty good grip on the limitations these trucks have. Keep up the good work! pick.Yikes, spinning 3,316 RPMs (with a 3,600 redline?) seems a little dangerous to me. And I big difference in MPGs,
Yep WARWAG - I noticed some of the 09 owners are shy of running faster than an 08.An M1009 has I believe 3.09 gears? I know they are allot taller than the 4.56 gearing found in the M1008 1010 1028 ect. If you have tall gears like that then you are not even approching the RPM levels we are talking about.
I have been wanting to go by a local sign shop and see if they could make this like the "Convoy" signs on a aluminium sheet. I would prefer the military issue delineator panels to stay more original but good luck finding them in decent condition.Hey guys, Im hoping to be getting my M1008 out of the shop this week. I will be going to Crystal Lake, IL on the 29th of this month to visit family. I would really enjoy taking the 1008 there. It would be my very first out of town trip with it.
Im just wondering about the whole 50-55 top (cruising) speed thing. According to a gear ratio calculator I will be at 2,551RPM at 50MPH, and for fuel mileage reasons I would like to stay around there. I will have my Tiny Tach installed along with a GPS to verify speed.
So if Im doing 50 and the speed limit is 65 which means people are doing 70-75, will I be safe with a slow moving sign on the back (best gift ever from my gf) and my hazard on??
Or should I stay clear of the interstate? What do you guys recommend??
Well I might as well jump in here and offer my 2 cents.
What WARWAG said about the crankshafts in post #38 is true. Also, the harmonic balancer is critical to reducing bearing fatigue at high rpm's. If you are going to cruise along and enjoy the ride, you probably need to travel over there on the "old road". If you want to run 60 - 70 on the interstate, simply INSTALL TALLER TIRES. As you might can imagine, I am a big fan of tall tires. With my 11.00/20 NDT on my M1028, I can cruise at 65 turning 2391 RPM.
Not to change the subject of this thread, but I've seen you're profile picture on here a few times before and have always wondered if you have noticed a reduction in torque with those tall tires? Say pulling something from a dead stop with the tall tires over stock ones? Of course I'm unsure if you have engine mods because that changes things.With my 11.00/20 NDT on my M1028, I can cruise at 65 turning 2391 RPM.
Minor thread derailment, but relevant to visibility on the highway, so...I would prefer the military issue delimiter panels to stay more original but good luck finding them in decent condition.
Well I might as well jump in here and offer my 2 cents.
What WARWAG said about the crankshafts in post #38 is true. Also, the harmonic balancer is critical to reducing bearing fatigue at high rpm's. If you are going to cruise along and enjoy the ride, you probably need to travel over there on the "old road". If you want to run 60 - 70 on the interstate, simply INSTALL TALLER TIRES. As you might can imagine, I am a big fan of tall tires. With my 11.00/20 NDT on my M1028, I can cruise at 65 turning 2391 RPM.
I painted something like that on the back of my M1028 back when I converted it to a flat bed body. It's alot easier than you would think. All I used was some two inch blue painters tape and a small angle tool and was able to get the stripeing to turn out perfect like a machine did it. Keep in mind though that the longer you make the stripes the wider they have to be to look right. In my pics that is a four inch wide piece of metal with two inch wide stripes. Also the main reason I painted those stripes on there was to kinda warn people that this is a slower vehicle. If the speed limit is 65 or higher I run the amber rotator light also and get the heck off that road ASAP!I have been wanting to go by a local sign shop and see if they could make this like the "Convoy" signs on a aluminium sheet. I would prefer the military issue delineator panels to stay more original but good luck finding them in decent condition.