greene1564
New member
- 7
- 0
- 0
- Location
- Kingsport, TN
I have a 1986 m1009 with the 6.2 and I need alittle bit of help..my first problem was after the engine got to operating temp I had to use a shot of starting fluid to start the truck so after years of this I purchased a rebuilt IP off of ebay and installed it now the truck will start when it is cold idles really ruff like a gasser that has fouled plugs then smoothes out but the whole time white smoke comes out of the exhaust and as it warms up the the smoke is still there but not as bad unles I rev the engine then a burst of white smoke comes out and when it gets to operating temp the truck will not start back up not even with a shot of starting fluid I have to wait for the truck to completely cool off then hit the gp and it fires up and the process starts over again...any help would be appreciated..
Thanks Sam
Thanks Sam