ip pump

[wharfman]

i have a m54 leaking fuel in oil going to try to replace o ring on hydraulic head
on ip pump can some one tell me how it comes off or do i have to take the ip pump off the motor and what tm shows how to do this?
thanks for any help dave

 

[gimpyrobb]

Is your FDC by-passed? Many have found that is the source of their fuel in the crankcase problems. Before I tried to swap out the HH O-rings, I would do the bypass.

 

[wharfman]

yes it is bypassed and no manafold heater it is the ip pump
thanks dave

 

[wharfman]

can some one tell me what im doing wrong lined up timing mark unbolted hydraulic head assy but can not get it to pull off what am i missing
thanks

 

[gimpyrobb]

The timing mark only gets you close. You need to line up the red/scored tooth that is under the engine kill pully thingy on the side of the IP under the HH.

PM sent.

 

[gimpyrobb]

Found my pics, gimme a sec while they load...

 

[gimpyrobb]

Pics

 

[gimpyrobb]

Clear as mud?

 

[wharfman]

thanks guys it came off thanks for your help know if i can get it back together and working
dave

 

[wharfman]

were is the best place to get a rebuild kit for my ip pump ?
thanks dave