-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Is there a chart to match TSU to Control Box. Here is a picture of my C ontrol Box
- Thread starter Dan&Liz
- Start date
- 482
- 1,123
- 93
- Location
- AL
Lots of great info here but not definitive on what you need.
PCB, EESS, SmartStart S3 i pics/info.
Here's some photo's... First is an old LAU.....not used anymore. PN 12379864 # 2..KDS green label...CR-2699.....burnt and corroded. This old type can use any temp sensor. . . This one...KDS yellow label 12469158-1 Can use KDS or Nartron temp sensor 12469158-2
www.steelsoldiers.com
Last edited:
- 1,710
- 2,265
- 113
- Location
- Rosamond, CA
Those are showing up surplus. They and the SSI company are old OLD school, out of business. IMO... I would be careful in its use.
It's a bit of an odd one. I was given one as an "engineering sample" Was hermetically sealed (soldered housing) and a pain to crack open.
Curiosity killed this cat... in the Camoteksystems lab, CAMO
- 4,401
- 4,185
- 113
- Location
- Brentwood, Calif
i do believe that SSI box is a single component box, meaning it uses no TSU or GPC in the water crossover .
they are garbage…toss it in the garbag.