Is this the correct transmission?

[Lonesome715]

I just picked up this M38 last week. It has a flat head and no tranny. A friend of mine happens to have one. But, I am not sure if it will work.

Sorry for the bad photographs. It is tucked away and difficult to get to.

 

[Lonesome715]

Forgot this one.

 

[porkysplace]

I just picked up this M38 last week. It has a flat head and no tranny. A friend of mine happens to have one. But, I am not sure if it will work.

Sorry for the bad photographs. It is tucked away and difficult to get to.

I don't think so , here is a picture of a T-90 from a CJ .

 

[NDT]

Agree, transmission is not for your Jeep or should I say Jeep salad. I see a M38A1 body on a CJ-2 frame.

 

[Lonesome715]

Any idea what the transmission is? Will in not bolt up and work at all? If I am already dealing with a soup sandwich I am not all that concerned about it being"correct" as long as I can get it to work.

Unless... I can find a better option for $100. That is how much he wants with transfer case.

 

[Lonesome715]

Oh, there is a bell housing bolted to the engine I have.

 

[porkysplace]

Any idea what the transmission is? Will in not bolt up and work at all? If I am already dealing with a soup sandwich I am not all that concerned about it being"correct" as long as I can get it to work.

Unless... I can find a better option for $100. That is how much he wants with transfer case.

The transmission he has has a driveshaft yoke hang off it , so that indicates it was from a full size pickup with a divorced transfer case . It is unlikely you can adapt that transmission and transfer case and if you could it won't be cheap.

 

[Lonesome715]

It is difficult to see in the photograph, but there is a transfer case bolted to the back.

 

[gringeltaube]

The transmission he has has a driveshaft yoke hang off it , so that indicates it was from a full size pickup with a divorced transfer case . .

That is not correct. What we see is the yoke on the end of what seems to be a DANA 20 T-Case, which is not divorced.

It is unlikely you can adapt that transmission and transfer case and if you could it won't be cheap

The only problem I see is with the rear driveshaft, connecting a straight-through TC with a rear differential which is offset to the pass. side.

 

[porkysplace]

That is not correct. What we see is the yoke on the end of what seems to be a DANA 20 T-Case, which is not divorced.


The only problem I see is with the rear driveshaft, connecting a straight-through TC with a rear differential which is offset to the pass. side.

It a bad picture to work with .

 

[Lonesome715]

Sooooo I guess I should not get that transmission?