- 124
- 81
- 28
- Location
- Port Angeles, WA
Does anyone know where to find both M and F version? Or perhaps the model number of the connectors?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Isuzu powered Drash 5 pin connectors
- Thread starter Mk23
- Start date
- 6,066
- 4,429
- 113
They aren't specific to the Isuzu version. What they are is a 60amp 3phase plug, used in several different applications.
They are hideously expensive. I have the part numbers somewhere (New phone, lost a bunch of stuff), and I'll post them if I can find them again.
They are hideously expensive. I have the part numbers somewhere (New phone, lost a bunch of stuff), and I'll post them if I can find them again.
- 2,974
- 4,355
- 113
- Location
- Olympia/WA
This link is to the datasheet showing the military cable connector identification system
And these links match what those numbers say, and also match the "UEC 32-12" spacer in the middle of the one you posted a picture of in the other forum
roughly $350ish for the cable ends, and $160ish for the equipment mount ends.
Pretty spendy, but not the worst I've ever seen.
For that kind of pricing considering we were discussing you using it as a load bank for your MEP803, you might be better off just buying some 240V shop heaters as have been discussed on other threads. They will give you better control over the amount of load, and you don't have to open up the ECU and disable any of the heat coils to bring the load down.
And these links match what those numbers say, and also match the "UEC 32-12" spacer in the middle of the one you posted a picture of in the other forum
roughly $350ish for the cable ends, and $160ish for the equipment mount ends.
Pretty spendy, but not the worst I've ever seen.
For that kind of pricing considering we were discussing you using it as a load bank for your MEP803, you might be better off just buying some 240V shop heaters as have been discussed on other threads. They will give you better control over the amount of load, and you don't have to open up the ECU and disable any of the heat coils to bring the load down.
Last edited:
robertsears1
Active member
- 255
- 119
- 43
- Location
- Near Apex/NC
Look closely on the green rubber area and you may see a number, should be 32-12 as mentioned above. That kind of connector is on the FDECU (field deployable environmental control unit). Look on ebay under 32-12 connector. The female end seems harder to find. I got a couple for around $75 and felt lucky.
Robert
Robert
Last edited:
Zed254
Well-known member
- 866
- 466
- 63
- Location
- S. Hampton Roads, VA
I like the price of these connectors for my MEP-803A. However, these are 3 phase .... meaning the spades turn in toward center of connector versus the similar single phase 50 amp connectors (think CEP spider box) with spades that turn outward. The ones I received looked like they had been plugged in one time = excellent condition.
LOT of 6 Hubbell 3 PRONG 250V 50A 3-PHASE TWIST LOCK MALE & FEMALE PLUG PAIRS | eBay
Find many great new & used options and get the best deals for LOT of 6 Hubbell 3 PRONG 250V 50A 3-PHASE TWIST LOCK MALE & FEMALE PLUG PAIRS at the best online prices at eBay! Free shipping for many products!
www.ebay.com
- 16,755
- 24,064
- 113
- Location
- Burgkunstadt, Germany
Part numbers are on the plugs. Have to remove the screws/nuts, but they will be marked. Have to pull them out a bit. When you know what one side is, you can get the other side.
- 16,755
- 24,064
- 113
- Location
- Burgkunstadt, Germany
Why do you have two threads for this problem? Please have one deleted. It makes old people like me crazy, trying to keep up with you.
- 124
- 81
- 28
- Location
- Port Angeles, WA
I tried deleting the other one this morning,
it wouldn't let me do it!
it wouldn't let me do it!
- 16,755
- 24,064
- 113
- Location
- Burgkunstadt, Germany
Ask a moderator. He can take care of it.
- 3,827
- 5,934
- 113
- Location
- MA
Maybe you should ask @Suprman if these cables will work here... or at least to get better markings off them for you. Price is certanly right if so!
MILITARY TQG GENERATOR PARALLELING CABLE 6150-01-406-9533 88-22209 MEP 804A 805A | eBay
Find many great new & used options and get the best deals for MILITARY TQG GENERATOR PARALLELING CABLE 6150-01-406-9533 88-22209 MEP 804A 805A at the best online prices at eBay! Free shipping for many products!
www.ebay.com
- 16,755
- 24,064
- 113
- Location
- Burgkunstadt, Germany
Actually, this cable can also be used on the DOD gen sets also. MEP-004A - MEP-007A.
- 6,066
- 4,429
- 113
This us the parallel cable. Different pins, much smaller. Will not work for the 60amp J1 port.Maybe you should ask @Suprman if these cables will work here... or at least to get better markings off them for you. Price is certanly right if so!
MILITARY TQG GENERATOR PARALLELING CABLE 6150-01-406-9533 88-22209 MEP 804A 805A | eBay
Find many great new & used options and get the best deals for MILITARY TQG GENERATOR PARALLELING CABLE 6150-01-406-9533 88-22209 MEP 804A 805A at the best online prices at eBay! Free shipping for many products!www.ebay.com
- 124
- 81
- 28
- Location
- Port Angeles, WA
Thank you for pointing that out!! Actually seller does have a cable I could use, but it $400. A bit more than I would like to spend...
MILITARY DRASH & APPLIED GENERATOR 120/208 V 3-PH 4W 60HZ 60A POWER OUTPUT CABLE | eBay
Military 120/208 volt AC 3-phase 4 wire 60 amp 60hz power output cable. This is the standard military 120/208 60 amp 3 phase connection. Cable is approx 20 feet long. Plugs into the main output connector on the Applied HVAC gens.
www.ebay.com
Last edited:
- 2,974
- 4,355
- 113
- Location
- Olympia/WA
plus shipping brings it over $500. A lot more than I would want to spend without it being a necessity.Thank you for pointing that out!! Actually seller does have a cable I could use, but it $400. A bit more than I would like to spend...
MILITARY DRASH & APPLIED GENERATOR 120/208 V 3-PH 4W 60HZ 60A POWER OUTPUT CABLE | eBay
Military 120/208 volt AC 3-phase 4 wire 60 amp 60hz power output cable. This is the standard military 120/208 60 amp 3 phase connection. Cable is approx 20 feet long. Plugs into the main output connector on the Applied HVAC gens.www.ebay.com
- 6,066
- 4,429
- 113
That's the correct cable, and not a bad price really. You can't buy the components for that.Thank you for pointing that out!! Actually seller does have a cable I could use, but it $400. A bit more than I would like to spend...
MILITARY DRASH & APPLIED GENERATOR 120/208 V 3-PH 4W 60HZ 60A POWER OUTPUT CABLE | eBay
Military 120/208 volt AC 3-phase 4 wire 60 amp 60hz power output cable. This is the standard military 120/208 60 amp 3 phase connection. Cable is approx 20 feet long. Plugs into the main output connector on the Applied HVAC gens.www.ebay.com
If I didn't already have one, I'd be buying it.