- 6,093
- 4,495
- 113
..and I have no idea why I bought it. It's a completely useless heavy thing. I have no idea what to do with it.
I guess I'll just have to get the front half....
I guess I'll just have to get the front half....
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
it isn't really a trailer....
- Thread starter 98G
- Start date
camoyj7
Member
- 926
- 18
- 18
- Location
- wonder lake IL
Makes for a big converter dolly! lol
OilfieldRoughneck
Member
- 582
- 7
- 18
- Location
- Dubois, Wyoming
Hopefully you got it cheap
- 6,093
- 4,495
- 113
That's what I was thinking... the mother of all semi dollies 
.
Except that even without a trailer it reaches the max rated tow weight for the M939series cargo trucks, lol.
. Except that even without a trailer it reaches the max rated tow weight for the M939series cargo trucks, lol.
quickfarms
Well-known member
- 3,495
- 25
- 48
- Location
- Orange Junction, CA
But who else on the block has one
rustystud
Well-known member
- 9,298
- 3,074
- 113
- Location
- Woodinville, Washington
What is meant to tow it ? A HET ? Or something bigger ?
- 6,093
- 4,495
- 113
It isn't really a trailer. Note the diffs on the axles - they're powered (and have lockers even). This is the back half of a mk48/16, like a hemtt that hinges in the middle. The driveshaft is in the bed of my 5ton. The drawbar is a cobbled together piece to allow it to be towed by a truck, but the brake and electrical and hydraulics are plumbed like a truck, not like a trailer.
I've convinced myself I want a mk48 to make it complete.... i giggle every time I see the warning sticker on the back that says not to exceed 100,000 lbs on the pintle hitch. ..
Attachments
Last edited:
FloridaAKM
Well-known member
- 2,699
- 392
- 83
- Location
- Gainesville, Florida
Now that you have the largest semi dolly on the block, you have to get an MK-48 to complete it. They were selling the rear ends of an MK-48 in this area several months ago, but it had the knuckle boom crane instead of the 5th wheel. They went cheap as no one had a way to move them apparently, there was no tow hitch, just a bolt on frame attachment(plus the driveshaft) where it bolts to the MK-48 like yours does! Carry on!
- 6,093
- 4,495
- 113
Close up pic of the plate, by request. ..
Attachments
- 34,012
- 1,810
- 113
- Location
- GA Mountains
BBF has a few powered units that might be available.
- 6,093
- 4,495
- 113
A few FPU got out intact, but the vast majority required mutilation.
CUCVLOVER
Active member
- 2,352
- 9
- 38
- Location
- west Tennessee, just outside Milan
It sure is cool.
tim292stro
Well-known member
- 2,118
- 41
- 48
- Location
- S.F. Bay Area/California
IIRC, because the rear-end was interchangeable with the front power unit, three were several times more rear-ends than front.
- 7,409
- 2,503
- 113
- Location
- Interlachen Fl.
I am not a doctor but my diagnosis is one you have the Mean Green Disease ( have to buy everything olive drab) and invertitas. ( post pictures upside down). There is no cure for MGD but to go bankrupt and for the invertitas ask a friend to put a arrow on your pics as to North.
- 12,195
- 327
- 0
- Location
- gainesville, ga.
We shipped a good 20 out of FL. a few years ago, some were a complete mk48/what ever RPU, some just the FPU, there are 5 trailers(RPU) that can be interchanged to hook to the FPU, SO I am guessing what we are seeing now are the extra RPUs. Also the complete MK48/RPU was designed to pull a second RPU as a trailer (drive shaft dropped), If the puller was MK48/MK15, it could supply hyds to the towed RPU for crane, winch, container/ribbon bridge lift.
Last edited: