scootertrs
Active member
- 453
- 7
- 28
- Location
- miami/florida
While doing the complete go through of my new truck, I noticed that the horn was not operational. If grounded at the horn relay it would work fine. If I wiggled the steering wheel, once in a while it would do its thing. Tracing the wires we found that there is a connector at the bottom of the steering column, inside the cab that even though it looked OK, the outer piece that grabs the prong of the wire going to the horn relay had broken off. We were able to reassemble the connector and put it back together and now I can get your attention... figured I would give something back to the guys that have given me so much help.