Just installed Bullet 3 1/2 inch race muffler.

[Brock Steel]

Just installed the dyno max bullet on wife truck. Easy as hot knife through butter, Fit's behind heat shield and sounds great and only took about 45 min to install.

 

[wsucougarx]

pics?

 

[poof]

Price.... Part Number...name of parts store.

And Picture

I am leaning toward this my self.

 

[Speddmon]

Price.... Part Number...name of parts store.

And Picture

I am leaning toward this my self.

Same here, I only Live about an hour and a half from the Summit Racing Store in Akron, I have been thinking about doing this to my truck, but I want to see how it looks and know how hard it was to do.

 

[jatonka]

Here is a pic of the Dynomax #24216 I installed on my M109A-3 that I drove 7000 miles last year across the US on Rt 20 and Rt 30. Notice I extended the height of the stack a bit by not removing as much pipe as the length of the Dynomax. It really quiets the Multi down. Straight through, no sensed loss of power. JT out

 

[DieselBob]

Anyone have before / after EGT readings. Shouldn't really change much being a straight through design but you never know.

 

[avengeusa]

i did the same thing but hid it under the heat shield on the pass side, i have pics of it in my album, go look at them, makes a bit of a difference, and is a cheap easy mod

no egt's yet

 

[Brock Steel]

As you can see its hard to tell any difference until you get closer.

Product Code:WLK-24216
Manufacturer dynomax 24216 Performance from summit racing. 43 bucks, 2 clamps 12 bucks less yelling in the cab Priceless.

 

[tm america]

ive had the same one on my truck for a couple years now.my ears thank me for it

 

[DieselBob]

That makes for a nice clean install. I was getting ready to install a new exhaust system so it looks like a minor mod is in order.

 

[Speddmon]

I think you're right DieselBob, I like the way the truck looks, so I don't want to change that. But I can do without the noise, so this is a mod I'm going to do too. Helps with the noise, but doesn't take away from the looks of such a great piece of American iron!!!!

 

[JTugwell]

wouldn't mind doing this to mine. just out of curiosity would it make any power difference? i wouldn't think so, but in the same breath i would hate to be lacking anymore power than it already has.

 

[jblack6527]

Nice looking install! You wouldn't happen to have any sound clips you could post up do you?

 

[Jinx]

ive had the same one on my truck for a couple years now.my ears thank me for it

So do your neighbors.

 

[bgekky3]

The EGTs are the same before and after. I used the larger napa muffler. If you don't isulate the cab, you need hearing protection at 40+. The trans starts making a lot of gear noise. If you cut the exhaust straight and put on a clapper, it will take the drone out of the exhaust note as speed. I did that before I put the muffer for a comparison.

If I didn't drive across the country with the wife and cat I would have just added a foot of pipe and the clapper. When I did the comparison test, I just cut off the elbow. If the pipe was a little longer it would get the noise out of the window.

 

[gimpyrobb]

If anyone near Cincy is going to add one, I have spl meters to get numbers for the rest of the gang.