LDT 465 Parts ??

[338lapua09]

Looking for a engine parts supplier for a White LDT 465...and Manual info like torque specs ect...
I have one with no oil flow let alone pressure....the pan is off an no suprises showing yet...

Any info would be great

Thank Rodger

 

[patracy]

There's a number of suppliers out there. The TM's would greatly help you as well for torque specs.

 

[338lapua09]

Thanks for the standard answer...but already been digging around for awhile and I am not seeing a one stop shop for parts ...I guess I'll have to start making phone calls this week..

I just thought with the amount of truck made there would be better sources..unless you guys already used up all the good stuff..lol

 

[Warthog]

Memphis Equipment would be a one stop source for parts. You better have deep pockets.

The TMs have all the info you need.

 

[FMJ]

I might be wrong but I think the manufacturer of the motor is irrelevant, if it's a LDT-465, the parts are interchangeable. Once you figure out what parts you need post it, and see if someone on here can supply what you need, will most likely be cheaper than the parts outfits like Memphis, Eastern, etc...

 

[Nonotagain]

TM 9-2815-204-35 covers the engine assembly and torque values. I'm not sure if the TM is listed as one of the ones on the site, but the new version of software the site is using limits me to less than 10 mb file sizes and the TM is almost 13 mb.

As far as other parts, LOGSA can be your friend. https://www.logsa.army.mil/etms/ind...a272e9747-BBDD081B-A597-0B56-BDFC8F27F9D7E42B

Just enter M35 for "PUB TITLE TEXT" and you'll have access to more TM's that you can read in a month.

 

[gimpyrobb]

I might have an oil pump. There is an idler gear that drives the pump. I had a bearing in my idler gear 5hit the bed and almost ruin everything. Make sure that is still good.

 

[338lapua09]

Thanks for the info...will post findings when I dig alittle deeper..so far all looks good but my xray vision glasses are on back order...haha..

The shame about this engine runs to darn good to have any issues..

 

[338lapua09]

Did get to take apart the oil pump...looks like new...time to dig deeper..will update soon..

thanks again for the info

Merry Christmas

 

[gimpyrobb]

Is the idler gear in working order?

 

[winerydale]

Have you tried the oil pressure regulator? Its on the passenger side behind the turbo. David

 

[TNJMurray]

We stock all parts and I can help you with torque info. Tnjmurray.com. Murco@tnjmurray.com