• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

LME maintenance tent erection

glassk

Active member
998
6
38
Location
Hampton, GA
NOOOOOOOOOOOOOOOOOOOOOOOOO

Take over to Camo please, I will get it from PB at some time!!!!!!!!!!!!!!!!!

Thank You!

I stretched it out yesterday, it is the round top vinyl material, only thing is it's pretty dirty, and some stitching has let go. cleaned up might make some fabric for your bottom gap or cut for an end


and can take by Larry's if you still want to look at it.


swiss has exceeded their stored private messages quota and cannot accept further messages until they clear some space
 

Attachments

73m819

Rock = older than dirt , GA. MAFIA , Dirty
Steel Soldiers Supporter
In Memorial
12,195
325
0
Location
gainesville, ga.
OR bring it to the rally where we can drag it along with EVERYTHING else that is acquired, to its new home, also any time Mr.S. has a full pm box, just pm me.
 

porkysplace

Well-known member
Steel Soldiers Supporter
9,604
1,493
113
Location
mid- michigan

73m819

Rock = older than dirt , GA. MAFIA , Dirty
Steel Soldiers Supporter
In Memorial
12,195
325
0
Location
gainesville, ga.

porkysplace

Well-known member
Steel Soldiers Supporter
9,604
1,493
113
Location
mid- michigan
How big are tapcons? The holes are about 5/8

Yes the holes will be in an angle

View attachment 580991
View attachment 580992

Lifting the first 16 foot wide section
Looking at their website it looks like they now have them up to 1/2 inch they used to only go to a 1/4 inch . But with Tapcons you have to use the correct size drill bit ( they come with the boxes of 100 ) or they won't tighten down right . They are good at holding thingsto concrete but snap easy with side pressure .
 

Ferroequinologist

Resident railroad expert
Steel Soldiers Supporter
4,810
742
113
Location
Liberty Hill, SC
If you can't use that vinal section I sure could, I have the old style tent and half the canvas I got is ruined. It is going to be awful for me to get it on there by myself. I put the frame up by myself so I can figure something out. If anyone has anymore vinyl sections free or cheap please let me know!

Looks really good guys. Will be much better than working out in the sun and rain.
 

swiss

Well-known member
Steel Soldiers Supporter
2,731
856
113
Location
Oakwood, Ga
Okay let's finish posting, it's easier to load pics via tap talk but not good for writing on the phone. I will add narrative later

ImageUploadedByTapatalk1442152907.009853.jpg
ImageUploadedByTapatalk1442152920.446754.jpg
ImageUploadedByTapatalk1442152944.042415.jpg
ImageUploadedByTapatalk1442152972.274086.jpg
ImageUploadedByTapatalk1442152994.371071.jpg
 

swiss

Well-known member
Steel Soldiers Supporter
2,731
856
113
Location
Oakwood, Ga
Okay so how do you lace up the two sections once you have put them up separated?

You go flying

ImageUploadedByTapatalk1442153059.034298.jpg
ImageUploadedByTapatalk1442153075.888315.jpg
ImageUploadedByTapatalk1442153113.678366.jpg

Not very comfortable

ImageUploadedByTapatalk1442153149.394170.jpg
ImageUploadedByTapatalk1442153169.986666.jpg
ImageUploadedByTapatalk1442153192.029785.jpg

Without heavy equipment I don't see how you could put this up. I think if you did not put on blocks maybe a normal wrecker could lift high enough but we used the following

M62 wrecker
M819 wrecker with extended boom
Large tractor with front end loader
M923 block hauler
22 foot extension ladder
20 foot drain pipe
20 foot 6x6
Lots of archer straps
Body harness
45 plus hours
 
Last edited:
Top