• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

LME maintenance tent erection

swiss

Well-known member
Steel Soldiers Supporter
2,731
857
113
Location
Oakwood, Ga
Finally got all the pad area prepared to erect my LME tent. When I had the scrapper in building a pond I had them haul a bunch of loads into the area to create a flat zone. Add 36 ton of #4 and agg base and you have a nice maintenance and parking area.

The tent is a 12 man operation for assembly so it will be interesting to see how one man and wrecker can assemble!


pics in next post
 

swiss

Well-known member
Steel Soldiers Supporter
2,731
857
113
Location
Oakwood, Ga
Some of these projects would never happen without the fellowship of our friends on SS. The tent was purchased last summer and brought up to the GA Rally last year by Kenny. (BIG THANKS KENNY). Then our expert Skid Steer operation GIMPY (BIG THANKS GIMPY) helped to the relocation from Kennys' trailer to the M932. It has sat in the back of the truck for the last 9 months waiting until all the work got done to get the site ready. Me and 73M819 unloaded last Friday and the work could begin on Saturday.

I was a bit panic looking at the number of bags of equipment and the amount of stuff needed to assembly. Have no fear after reading the TM all the bags and pieces were accounted for.
 

Ferroequinologist

Resident railroad expert
Steel Soldiers Supporter
4,810
742
113
Location
Liberty Hill, SC
Ah nice. I have my frame set up and got a set of canvas for it, but haven't gotten brave enough to try putting it on. One man can assemble the old style tent if he is pretty smart. Or in my case really lucky!
 

swiss

Well-known member
Steel Soldiers Supporter
2,731
857
113
Location
Oakwood, Ga
Ah nice. I have my frame set up and got a set of canvas for it, but haven't gotten brave enough to try putting it on. One man can assemble the old style tent if he is pretty smart. Or in my case really lucky!
Ah yes Lady Luck!! I have a plan for the canvas, stay tuned. The tm has 12 guys carrying the rolled and assembled pieces and placing on top of the frame that is flattened on the ground. These same 12 then lift the frame to hoist it up, I don't have 12 soldier b so the m62 and m819 are in the plan.

Got 16 tons sand delivered today for another enhancement to the assembly. Going to raise the whole tent another 2 feet higher.
 

CARNAC

The Envelope Please.
Supporting Vendor
8,280
655
113
Location
Corpus Christi, TX
The tent is a 12 man operation for assembly so it will be interesting to see how one man and wrecker can assemble!


pics in next post
I got one erect once. I'd like to say I did it by myself once but didn't quite do that. CruzinZ28 and his buddy (non-member) and I set one up at Gilbert a few years ago. It was a PITA but kinda glad we did it cause we were about the only dry folks there. THEEEENNNN the time to tear down came and that wasn't fun at all.
 

swiss

Well-known member
Steel Soldiers Supporter
2,731
857
113
Location
Oakwood, Ga
The manual says to build the main section then extend the legs flat. You then take a small army to lift the whole thing up.

I am going to build the frame, lift frame then add covers

Here is assembling the base frame pieces

ImageUploadedByTapatalk1440619958.872917.jpg
ImageUploadedByTapatalk1440619987.585416.jpg
 

Recovry4x4

LLM/Member 785
Super Moderator
Steel Soldiers Supporter
34,012
1,808
113
Location
GA Mountains
That sucker was heavy to load. Glad it's not going in my AO. Will be nice once up though!
 

swiss

Well-known member
Steel Soldiers Supporter
2,731
857
113
Location
Oakwood, Ga
MV good idea but we have another approach for 60 mile an hour winds. Stay tuned!!

The design criteria was not to loose the 15 feet on each side required to properly stake down the tent. We have it down to 2 feet now.
 

swiss

Well-known member
Steel Soldiers Supporter
2,731
857
113
Location
Oakwood, Ga
So I started to build frame assemblies and was trying to figure out how to put the sides together without dragging the frame all over the rocks.

ImageUploadedByTapatalk1440629206.808919.jpg
ImageUploadedByTapatalk1440629474.915688.jpg

Ultimately had to unhinge one side and lower like the tm said. Then rigged up a harness that was hooked up to wrecker boom from rope but that did not work. Plan b was a ridged something

ImageUploadedByTapatalk1440629503.680706.jpg
ImageUploadedByTapatalk1440629526.327401.jpg
 

swiss

Well-known member
Steel Soldiers Supporter
2,731
857
113
Location
Oakwood, Ga
Okay made more headway yesterday. 73m819 made a Lego run yesterday to get some adult Legos.

So with a pile of sand and adult Legos what are we up to?

ImageUploadedByTapatalk1440770768.910099.jpg
ImageUploadedByTapatalk1440770780.262376.jpg
ImageUploadedByTapatalk1440770789.683990.jpg

More details of where the frame is at the moment. There is still the leg extensions and another 8 foot section to install on the frame

ImageUploadedByTapatalk1440770860.366664.jpg
ImageUploadedByTapatalk1440770872.107076.jpg
ImageUploadedByTapatalk1440770885.246437.jpg
ImageUploadedByTapatalk1440770895.532910.jpg
 

swbradley1

Modertator
Staff member
Super Moderator
Steel Soldiers Supporter
14,261
1,761
113
Location
Dayton, OH
I like the use of drain pipe to raise it all at once. Field expedience is always good.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks