MrMikey4026
Well-known member
- 281
- 417
- 63
- Location
- Eatonville Washington
I used this stuff, it worked fine.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
LMTV door seal
- Thread starter profo
- Start date
JD4044M
Well-known member
- 465
- 999
- 93
- Location
- Okanogan, WA. 98840
I need to glue one side back on my M1078 but it uses one like this type and the door closes into it? I will take a picture now of mine just stuck to the jam not the door. Was going to be a pain to put on with a little tape every few inches to hold it till dry!
OK I see it is 2 parts in one my 2nd part on the Cab is OK and solid and the Passenger side is OK except a few inches in the door jam bottom is loose. Stupid place for a splice? I still have the drivers side original Tube part. I just removed the whole thing to re/install it solid again. Going to take 2 people to do that job.
job.
OK I see it is 2 parts in one my 2nd part on the Cab is OK and solid and the Passenger side is OK except a few inches in the door jam bottom is loose. Stupid place for a splice? I still have the drivers side original Tube part. I just removed the whole thing to re/install it solid again. Going to take 2 people to do that job.
job.
Last edited: