- 484
- 1,036
- 93
- Location
- Mesa, Colorado
Those 4 Dave Anderson Videos of installing lockers in the carriers were very detailed on the full disassembly of front and rear since he had to pull the axles to get the centers out. Might be a good video prep?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
LMTV FMTV front axle outer seal replacement
- Thread starter Keith Knight
- Start date
- 758
- 1,558
- 93
- Location
- Wauchula, FL
Do you have a link to those videos?
- 484
- 1,036
- 93
- Location
- Mesa, Colorado
Yes here's part 1&2. It's called FMTV 3.07 front diff gears. He's got links to the other 3 parts on his channel. It's actually 5 total videos. I was wrong in that there's another 4 videos just for the rear!
Last edited:
- 484
- 1,036
- 93
- Location
- Mesa, Colorado
Last edited:
- 758
- 1,558
- 93
- Location
- Wauchula, FL
Thank you.
- 758
- 1,558
- 93
- Location
- Wauchula, FL
I’ll have to do a video on these seal replacements and post on my YouTube channel. nomadventures360
- 484
- 1,036
- 93
- Location
- Mesa, Colorado
- 484
- 1,036
- 93
- Location
- Mesa, Colorado
I'll watch!
- 410
- 701
- 93
- Location
- Texas Hill Country
What special tools do you have or need?
We just noticed gear lube coming out the rear axle vent; traced it to the right rear CTIS axle seal, there is gear lube in the banjo bolt =/ Not as big as the front axle job though—
Last edited:
- 1,647
- 4,469
- 113
- Location
- Portland, OR
Yep. Seems like most of these trucks need CTIS seals. Lack of air system maintenance and sitting. Definitely a must-do job while the hubs are apart for ECO hubs, etc.
- 410
- 701
- 93
- Location
- Texas Hill Country
@Keith Knight have you found a CTIS hub seal driver? Or what's your plan?