• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

LMTV/MTV A1 - Battery Cable Info

fuzzytoaster

Well-known member
Steel Soldiers Supporter
4,299
3,132
113
Location
Fort Worth, Texas
Would someone who owns an A1 (not A1R) please post a photo of their battery cable layout. I recently acquired an A1 that was overhauled into an A1R and S&S seemed to have blended the two designs together making a mess. No batteries in the truck currently (get it..current) and no labels.
 

Suprman

Well-known member
Supporting Vendor
6,861
696
113
Location
Stratford/Connecticut
The only truck I have on hand dosnt have a relay box next to the batt box so that wont help. Go to the polarity box under the spare tire and use a meter to trace wires back to the cutoff relay and then to the batt cables. There should still be a big 24v to the starter and I think there is a big ground that goes there too.
 
Top