Looking for a debugging/trouble shooting manual for the M1161/M1163?

[BFGOrdnance]

Hey there. I have been slowly getting the manuals gathered from this wonderful forum, but I have yet to see a basic operators or troubleshooting manual. We recently got 2 of our 3 growlers (the other is still awaiting EUC approval even though it was the first one we purchased go figure). They both started up and ran great, but then one of them just won't start again. Likely a fuel issue, but we are just trying to track down to make sure there is not something stupid like a fuel cutoff switch, etc. I'm hoping to find a checklist type guide that allows us to walk thru step by step. Has anyone seen something like this?

Thanks.

 

[SLC]

Hey there. I have been slowly getting the manuals gathered from this wonderful forum, but I have yet to see a basic operators or troubleshooting manual. We recently got 2 of our 3 growlers (the other is still awaiting EUC approval even though it was the first one we purchased go figure). They both started up and ran great, but then one of them just won't start again. Likely a fuel issue, but we are just trying to track down to make sure there is not something stupid like a fuel cutoff switch, etc. I'm hoping to find a checklist type guide that allows us to walk thru step by step. Has anyone seen something like this?

Thanks.

I need a favor if you can . I just got my M1163 in and noticed that 4-9-11-12 in the fuse blocks are missing.Could you tell me if these are used and what amp they are. You can email me at samcapua@ gmail.com. I would greatly appreciate it. Thanks

 

[W427]

I need a favor if you can . I just got my M1163 in and noticed that 4-9-11-12 in the fuse blocks are missing.Could you tell me if these are used and what amp they are.…

@SLC - you want the file "ITV_FUSES-TM 2320-OR-B.pdf" in this post. Also, a convenient printable fuse cover label is here.
Both you and @BFGOrdnance should get the Operator's Manual (TM 2320-OR/B, almost 600 pages) using the info in this post. Email only, please do not call them, and with COVID disruption be patient for replies. The TM Shop Manual is not yet released. However, many additional manuals, supplements and references are found by searching the site. Good luck!