DDT
Member
- 38
- 0
- 5
- Location
- Southern Cal
A few posts back I had some wiring issues. I found the 24v short to ground and I burnt 3 fuseable links. Links are fixed and gound solved. So I noticed 2 burnt spots on my glow plug relay. very small and they may not be fromt the original issue as the fuseable link feeding it the 24v is fine and I get 24.6 at the "in" post on the relay.
However I think the relay is original so my question is where can you find the original type relay. Napa and auto zone both carry the relay with the controller type as one unit. It has 5 or 6 blades to connect to a controller. It has 4 posts for the wires 2 big and 2 small.
So If I hooked up the napa part to 24v to feed the 24v glow plugs will it fry or is it the same internals? Its $80 from the store and the marked ebay cucv version is usually on there for $30 and is metal. ihave yet to fire mine up after its rebuild but it looks like I'll need to swap it out.
Do we have a controller seperate from the fire wall junction controller? Thanks for any posts... -Taylor
However I think the relay is original so my question is where can you find the original type relay. Napa and auto zone both carry the relay with the controller type as one unit. It has 5 or 6 blades to connect to a controller. It has 4 posts for the wires 2 big and 2 small.
So If I hooked up the napa part to 24v to feed the 24v glow plugs will it fry or is it the same internals? Its $80 from the store and the marked ebay cucv version is usually on there for $30 and is metal. ihave yet to fire mine up after its rebuild but it looks like I'll need to swap it out.
Do we have a controller seperate from the fire wall junction controller? Thanks for any posts... -Taylor