looking for hmmwv half doors.

[ari]

I was planning on cutting them to fit the front.

 

[Robus1022]

Im looking at my x doors and you would have 3"+ missing if you cut the back door angle vertically. Would have a big hole. The rounded contours are much larger on the front doors. Meaning you would have to cut the front bottom corner to match a much larger radias. Good luck

 

[Robus1022]

Better off making templates out of wood and tracing them with a plasma cutter on a piece of 1/4" aluminum.

 

[jake-cutter]

Hopefully TedG chimes in as he has had sets of half doors made in the past. I would buy a set to have. See link below:

http://www.steelsoldiers.com/showthread.php?55696-looking-for-hmmwv-half-doors

 

[TedG]

I'll get fresh pricing on these. They would be blanks...no hardware or arm rests. These front doors will sit about 1/4" higher than rears though but it never bothered me.

 

[ari]

Sounds good TedG just let me know. Thanks

 

[TedG]

I can get them made for $250 per set = left front door and right front panels. NO hardware, just cnc'd aluminum with all holes. pm me if interested. I will require advanced payment to secure your order for I do not need these. Shipping would be extra.

 

[jake-cutter]

TedG, any better pictures of the ones you will have made? Also, any luck having the rears made as the supply seems to have dried up on those.

 

[TedG]

Here are mine when populated. Again, I would only provide the flat door panel. NO hardware or Armrests.
Sorry, I will not be doing the rears.

 

[Retiredwarhorses]

Here are mine when populated. Again, I would only provide the flat door panel. NO hardware or Armrests.
Sorry, I will not be doing the rears.

View attachment 611058View attachment 611059

when I did mine, I had to use a set of rears to get the arm rests and hardware....I have a finished set that only needs paint and stripping...but they ain't cheap. They are a one off.

 

[jake-cutter]

Ted what kind of arm rest is that as I have not seen that style before?

 

[TedG]

That is a rear cut down to fit.

 

[jake-cutter]

I am finding two different types of rear half doors. One appears to be not as wide with a spacer on the hinge side and then the other is normal width. Where does the one with the spacer that is not as wide as the other come from? Any benefits to one over the other?

 

[TedG]

Rear doors: Version 1 is standard door. Version 2 is short for uparmored 1152.

Also, since no one has come forward for fronts panels, I am not going to have them made.

 

[jake-cutter]

Is anyone else going to order a set of the fronts? I found the rear half doors and even the rear armored half doors to take parts off of to complete the fronts. These make an excellent alternative to the overpriced X doors.

 

[jake-cutter]

Not enough orders for Ted to make these which is surprising in todays market. Looking for others to make these.

 

[rarpinz]

I can get them made for $250 per set = left front door and right front panels. NO hardware, just cnc'd aluminum with all holes. pm me if interested. I will require advanced payment to secure your order for I do not need these. Shipping would be extra.

YES!!!!! I will want to talk to you first but I'm thinking this is what I'll need. Please call me : Bob 262-352-4467

 

[TedG]

YES!!!!! I will want to talk to you first but I'm thinking this is what I'll need. Please call me : Bob 262-352-4467

Sorry, I'm not making them.

 

[rarpinz]

Sorry, I'm not making them.

Gosh.....got our hopes up for a bit there!!! Thanks for letting us know.

 

[jake-cutter]

I ended up getting a set made by member libbster29, but he is more active on the other forums.