Looking for oddball troop seats

[BKubu]

Does anyone have fiberglass (preferably) or wood troop seats that are 120" from the outside of one stake pocket to the outside of the end stake? These troop seats fit the M814/M55/M927. I have two NOS fiberglass troop seats and need SIX more to complete two M814s. Any help in finding these troop seats would be greatly appreciated.

 

[mangus580]

Bruce, are some of the upright posts shorter than others?

 

[BKubu]

Mike, I think that all of the upright posts are the same length. Honestly, I have never actually put my hands on the troop seats nor inspected any up-close. The two that I own are not at my house yet.

 

[mangus580]

See if you can determine that. I acquired a set from Kenny and D-man... that were supposed to have been deuce ones.... Until I got them. Somehow they lost 2' on the trip from FL to NY

 

[BKubu]

I will do so, Mike.

 

[MikeON]

I was searching through old posts, trying to identify the extra troop seat that came with my deuce, and came upon this thread.

It is 120" from outside to outside of the stakes. The top horizontals stick beyond the stake about 1.5" at the far end in the picture.

All the stakes are the same length. It is fiberglass. I haven't found any numbers on it.

Can anyone help identify this? I only have one. It will probably be for sale here or on ebay.

Mike

 

[emmado22]

Are you looking for 5 ton side racks/troop seats? They are 2 feet shorter than M35A2 ones? Those seem to be plentiful when your looking for M35A2 ones....

 

[emr]

I cant find a pm ? for a direct contact, but at my shop i came up with a set of troop seats that are strangs to me, so i will measure and get back to U, but may not find this again, so if u can ,mydeuceandwillys@aol.com may get lucky,

 

[Barrman]

I got 4 of those from Sermis a few months ago. They have been cut down to fit a pair of M715's already. (The 1st and 4th stakes line up perfectly with the M715 end bed pockets.) He might have some more if you send him a pm.

 

[papercu]

I have the little 2 foot sections if anyone needs some, most will have some bad wood on them. Wayne

 

[wreckerman893]

I have the fiberglass racks off of one side of a long bed deuce.
Let me know if you can use them.

 

[SCSG-G4]

WM, are you trying to give away my racks?

 

[dmmay]

Troop Seats

Hi Guys !! I am also looking for a set of Troop seats that will fit an M813A1 .. I believe they are the same length as a standard Duece troop seat ?? I am in OKC and trying to find something close !! Thanks

 

[emmado22]

better check those NSN's, I dont think they are the same...