Looking for pictures of the original M1009 spare tire mount.

[Fred E Rick II]

Hi everyone.

I am new to this forum. I've had a M1009 for 3 weeks now. I've been using a lot of good information on here to get it up to speed. A project I would like to do one of the next few weekend is to fabricate a spare tire mount for the inside of the M1009 like how it was originally. It has none of the parts for it, so if anyone can send/post pictures of the hardware I would greatly appreciate it. I have found post talking about this, but I can't seem to find any pictures online.

 

[avlon01]

Check Ebay for spare tire mounting kits. They will often have very clear and detailed pictures.

 

[cucvrus]

PM sent

 

[milradioman]

I need a spare tire carrier too, and have contemplated fabricating one, but hesitate because there must be a source at a reasonable cost out there somewhere, I have bought two parts vehicles and checked junk yards and all are missing the carrier. Someone who does fabrication could possibly manufacture and sell them.

 

[Recovry4x4]

I will see if I can find my way to the local U-Pick yards this Thursday. I see them there with some frequency.

 

[cucvrus]

I have several tire carriers for the M1009 if you are interested. Send me a PM.

 

[Recovry4x4]

Rick has several of everything. Good, saves me from going to the pick a part yard in the 900° weather.

 

[cucvrus]

Be quiet you like it.

 

[Fred E Rick II]

Hey Rick. Did you get my reply to your PM?

 

[lostintexas]

Not the best pic but here you go. Can get more if you need them.

http://i85.photobucket.com/albums/k45/LostInTexas/IMG_1131.jpg

 

[Warthog]

Why not use the diagram from the TM 9-2320-289-34P parts manual, figure 147? Amazing what you can find in the parts manuals.

 

[acesneights1]

From a junker I just picked up. Sorry for the bad quality but it's pouring rain out right now.The bracket that attaches to the cap hold down bolt on this one is mangled a little.

 

[lostintexas]

More photos of mine installed with 33" spare and then better pics of the bracket itself:

http://i85.photobucket.com/albums/k45/LostInTexas/photo 5.jpg
http://i85.photobucket.com/albums/k45/LostInTexas/photo 6.jpg
http://i85.photobucket.com/albums/k45/LostInTexas/photo 4.jpg
http://i85.photobucket.com/albums/k45/LostInTexas/photo 3.jpg
http://i85.photobucket.com/albums/k45/LostInTexas/photo 2.jpg
http://i85.photobucket.com/albums/k45/LostInTexas/photo 1.jpg

Tried to upload them direct but getting an error message so had to link to photobucket.

 

[donalloy1]

Why not use the diagram from the TM 9-2320-289-34P parts manual, figure 147? Amazing what you can find in the parts manuals.

View attachment 562702

Does anyone have a Flange in position # 2 they can part with? Have been unable to find one of those. Thanks in advance

 

[glassk]

Hi everyone.

I am new to this forum. I've had a M1009 for 3 weeks now. I've been using a lot of good information on here to get it up to speed. A project I would like to do one of the next few weekend is to fabricate a spare tire mount for the inside of the M1009 like how it was originally. It has none of the parts for it, so if anyone can send/post pictures of the hardware I would greatly appreciate it. I have found post talking about this, but I can't seem to find any pictures online.

http://www.steelsoldiers.com/showthread.php?14022-CUCV-M1009-External-spare-tire-mount


[h=4]Similar Threads[/h]

• [h=6]CUCV M1009 External spare tire mount[/h] By Mike_Pop in forum CUCV
  
  Replies: 20 Last Post: 12-24-2014, 19:53
  
  
  

 

[CARNAC]

Does anyone have a Flange in position # 2 they can part with? Have been unable to find one of those. Thanks in advance

I'll see if I still have one. I had several at Findlay and not sure if they sold or not. If I run into it while unpacking over the next few weeks, I'll send it since I am dispensing with my excess/extraneous feces.

 

[Jerryparentii]

Do you still have the spare tire mounts, how much?

 

[cucvrus]

I have the spare tire mount. Send me a PM or post in the parts wanted section. But yes I can help you out.

 

[hrbergeron]

Here's pictures of mine. The TM diagram is the most useful. Because I have a 33" on the spare I have to push the tire into the seat in order to close the tailgate.

 

[Jerryparentii]

Do you have any lift on your m1009 to fit the 33's I was told they would rub?