M 561 GAMMA GOAT ball joints

[Jericho]

Hey Guys, In a bit of a pickle, managed to source and rebuild a wheel drive shaft for the carrier in my second goat , but, ( there is always a but) after doing disassembly to replace the d=shaft, I find I am in need of a set of ball joints. If any one has a source for ball joints please drop me an email at Jetoneusaf@gmail.com Thanks Andy.

 

[doghead]

Which one? What's the NSN/part number?

 

[Jericho]

The TM 9-2320-242-34 P list the part numbers as 02252-0502 lower and -0501 as upper fig 113, pg 249 , did not see a FSN listed , will research it some more, thanks guys

 

[frenchman]

hello
how many ball joint you need i have some N.O.S 25dollars eachplus shipping
take two per wheel front and rear only email me at scmourey@earthlink.net
frenchman

 

[Jericho]

Hey French man, need two upper two lower to start then 5 more of each, email me at Jetoneusaf@gmail.com

 

[Jericho]

Gama goat ball joints.

Thanks to the French man, The ball joints worked out great, the 4 bolt are lowers, but I waterjetted a piece to weld on and made 6 hole joints out of two of the fours, took 3 hours fab time but well worth iT. Could nt have done any thing with out the joints from Frenchman. Kuddoes!!!! Now looking for the a napa or suitable PN for the wheel drive shaft joint on the primary drive (middle ) have seen it just cant remember where , if any one has a pn or joints please give me a shout. ( this is another joint on my daily driver Goat, so much for the "lubed for life joints") thanks again, Andy