• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

M1008 GP wait light stays on.

Twigiestdrip

New member
24
0
0
Location
FL
Well, I feel incredibly lucky that none of my plugs were stuck. All where swollen to some extent and one mushroomed up but came out with a very slight tug.

New plugs are in and the truck seems to be going through the startup procedure properly now, truck was just slightly warm from changing out the fuel filter about 5 hours earlier but it started with no white smoke, and I can see the voltage dropping and solenoid activating when the gp card continues the cycle for the 30 seconds after startup.

Thank you all for the help.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks