JTRUCKJMC
New member
- 4
- 1
- 3
- Location
- W.P.B., FL
Anybody scale an M1008 at all 4 corners for individual weights ?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
M1008 vehicle wheel corner weights
- Thread starter JTRUCKJMC
- Start date
JTRUCKJMC
New member
- 4
- 1
- 3
- Location
- W.P.B., FL
Maybe front vs rear weight. I need this for some custom springs i am going to have made. There is no longer a place to rent scales here anymore.
- 339
- 531
- 93
- Location
- Inverness, Florida
You might try to see if your local landfill or recycling company has scales they will let you use. I have done that with my RV at a local recycling place.
JTRUCKJMC
New member
- 4
- 1
- 3
- Location
- W.P.B., FL
We have a whole vehicle scale at work that will do a semi, however I am trying to weigh each corner. If I only knew a DOT or Trooper....
Bob H
Well-known member
- 3,144
- 162
- 63
- Location
- Huron National Forest, Michigan USA
Some race cars guys have scales.
The data tag on the door shows location of center of gravity, with that info a little math will get you front & rear weights on the axles. Right front probably has more than left front as the batteries are on the right , fuel tank on left may balance that out a little.
The data tag on the door shows location of center of gravity, with that info a little math will get you front & rear weights on the axles. Right front probably has more than left front as the batteries are on the right , fuel tank on left may balance that out a little.