nudewheeler
New member
- 41
- 1
- 0
- Location
- Tucson, AZ
Howdy Folks -
Quick question that was generated while trying to troubleshoot driveline vibrations.
Is the NP241 a direct drop in swap for the NP208 in an M1009?
Any need for:
Is this literally a component swap with no other considerations?
May have the opportunity to pick one up locally with a SYE installed on it. More info to come. Doing homework/research first about the install.
To only major incompatibility appears to be the input shaft for most NP241s were 27 spline. JBconversions sells a 32 spline input shaft for the NP241 to mate with a TH400.
Thanks in advance.
Quick question that was generated while trying to troubleshoot driveline vibrations.
Is the NP241 a direct drop in swap for the NP208 in an M1009?
Any need for:
- adapter plates
- shifter linkages
- crossmember modification
- rubber mount modification
- speedo cable modification
Is this literally a component swap with no other considerations?
May have the opportunity to pick one up locally with a SYE installed on it. More info to come. Doing homework/research first about the install.
To only major incompatibility appears to be the input shaft for most NP241s were 27 spline. JBconversions sells a 32 spline input shaft for the NP241 to mate with a TH400.
Thanks in advance.