m1009 replacement floor pan question

[howardc]

Drove it home tonight. I'm very happy with the results. The floor doesn't sink when I sit in the seat anymore! He also did the rockers. He cut the rust out of the bottom of the tailgate and put some new metal in. Next on the agenda is durabak.

 

[unaffiliated]

Looks like he did a very nice job.

 

[85CUCVtom]

Looks really good!

 

[Cleptomaniac]

Very nice!!

 

[rivcrazy2000]

Did it stay on the $1400 budget?

 

[ajsmith184]

Did it stay on the $1400 budget?

I am curious to hear the same..If he did...You're an extremely lucky customer! Looks like a lot more than that!

 

[stationjj]

It looks great! Your welder did a great job.

When you get the top on post some pictures.

stationjj

 

[Racallahan1]

Impressive! Did it bust the budget?

 

[howardc]

He stayed on budget, but he said he had to cut more than he was expecting. I'm gonna order the durabak this week and hopefully start prepping next weekend.

 

[howardc]

It looks great! Your welder did a great job.

When you get the top on post some pictures.

stationjj

Hey John!

Will do. Thanks again for the top! Got it sitting in the hangar at work for when the floor lining is done.

 

[howardc]

I got some time a couple weeks ago to get the top and seats out. Then my daily driver (03 trailblazer) lost third gear. So I threw the drivers seat back in the cucv and drove it around topless for about a week while a new tranny got put in the trailblazer. Anyway here are the pics so far, I'm going to hopefully get out and finish stripping it this weekend so I can do the liner next weekend.








.

 

[howardc]

It's done! I laid down one thick base coat (against manufacturers instructions) and then one thin coat to fill any spots I missed with the first coat. I let it dry for about a week and a half before I bolted the seats and other hardware in. I put durabak on the seat frames to both protect and make them look better. I'm happy with how it turned out, and i'm even happier that it's finally done.

 

[howardc]

More pics. Big thanks to stationJJ for my top!