M1009 wheel width?

[Dispatcher7]

I have an 85 D10 Blazer with the 31 10.5 tires. What is the wheel width? The truck is in Ohio, I’m in New York so I can’t simply measure it myself. Thanks.

 

[Black Ops]

It should be 8”.

 

[Dispatcher7]

It should be 8”.

Thank you! The truck is in Ohio with no spare. Trying to get a spare for it before driving back to NY this weekend.

 

[cucvrus]

Offer expired. A friend needs one and seen this. It was only an offer.

 

[LT67]

An M1009 has a 15x8in wheel...

 

[Dispatcher7]

I have a spare mounted on an M1009 wheel. I am at exit 90 I 81 in PA. That should be on your way to Ohio. $200. tire and wheel. Goodyear 31 10.50R15.View attachment 826723View attachment 826724

Thanks for the offer. I’m taking the train to Ohio. I found a spare in Toledo.

 

[nyoffroad]

The weekend is half over now, how are you doing? I hope your running 17 (southern tier x-way) and not I 90. Speed limits mostly the same but much less traffic on 17 and you can travel slower and not get run over! Good luck.

 

[Dispatcher7]

The weekend is half over now, how are you doing? I hope your running 17 (southern tier x-way) and not I 90. Speed limits mostly the same but much less traffic on 17 and you can travel slower and not get run over! Good luck.

Made it from McComb, OH to my daughters house in Westfield, NY. Heading out in about an hour and taking the southern route. Only concern I have is it seams to have no power around 30-45mph. From a stand still it takes off fine. Above that speed and it runs right along. But in that range of you come to a hill it bogs down. I’m going to try some injector cleaner and a new fuel filter to see if that helps.

 

[joshuak]

Made it from McComb, OH to my daughters house in Westfield, NY. Heading out in about an hour and taking the southern route. Only concern I have is it seams to have no power around 30-45mph. From a stand still it takes off fine. Above that speed and it runs right along. But in that range of you come to a hill it bogs down. I’m going to try some injector cleaner and a new fuel filter to see if that helps.

Here's to hoping it solves your issues and you have a safe rest of the trip home.

 

[cucvrus]

I would say fuel filter. I have had that happen many times when I picked one up after buying it and ran it hard to get home. Easy fix. Good Luck.

 

[LT67]

Made it from McComb, OH to my daughters house in Westfield, NY. Heading out in about an hour and taking the southern route. Only concern I have is it seams to have no power around 30-45mph. From a stand still it takes off fine. Above that speed and it runs right along. But in that range of you come to a hill it bogs down. I’m going to try some injector cleaner and a new fuel filter to see if that helps.

Fuel filter...

 

[Dispatcher7]

Just over 700 miles in 2 days. 19 mpg. With a 7 foot snowplow on the front


My son located and looked over this truck for me and handled the purchase. It’s the first vehicle I ever bought with out checking it out my self. I guess I taught him well and am happy with what he found.

it’s an 85 and turned 89,000 miles in the way home.

Thanks to everyone on here for the advice and concern during the trip.

This is also my first retired SteelSolider so I’ll have lots of questions

 

[dougco1]

Just over 700 miles in 2 days. 19 mpg. With a 7 foot snowplow on the front


My son located and looked over this truck for me and handled the purchase. It’s the first vehicle I ever bought with out checking it out my self. I guess I taught him well and am happy with what he found.

it’s an 85 and turned 89,000 miles in the way home.

Thanks to everyone on here for the advice and concern during the trip.

This is also my first retired SteelSolider so I’ll have lots of questions

Glad you made it.
You probably passed by my place on state rt 20 heading to Albany. You said your ride had a lack of power at 30-45 mph. Keep in mind, your driving a "Big Brick" and you slowed it down a bit more pushing allot of air with that 7ft plow.
I trust photos of your new ride are in the cards.