pacebm
Member
- 140
- 0
- 16
- Location
- Brewton, Alabama
Hello all, I haven't been on here in a while because I sold my old M1009 but I am afraid I have bought a basket case that I thought I could fix. Price was right so I rolled the dice and I need some help.
Previous owner converted to 12 volt and push button glow plug switch. Not real sure what else was completed but I did see the doghead relay appears to be on there.
I push the button for the glow plugs and it appears to work as it is supposed to because I hear the solenoid engage.
Here is my problem: Turn the switch inside and nothing happens. No lights come on in the dash, and definitely will not crank.
I have verified 12 volts across the positive bus and the junction box. The headlights do work, just nothing controlled by the switch. PO says it ran fine before but we will see. If nothing else I can sell y'all parts or sell it as scrap but I would like to get it running for my stepson. Is there something obvious I am missing? Maybe a fuse? I'm stumped so this is my version of phone a friend.
Previous owner converted to 12 volt and push button glow plug switch. Not real sure what else was completed but I did see the doghead relay appears to be on there.
I push the button for the glow plugs and it appears to work as it is supposed to because I hear the solenoid engage.
Here is my problem: Turn the switch inside and nothing happens. No lights come on in the dash, and definitely will not crank.
I have verified 12 volts across the positive bus and the junction box. The headlights do work, just nothing controlled by the switch. PO says it ran fine before but we will see. If nothing else I can sell y'all parts or sell it as scrap but I would like to get it running for my stepson. Is there something obvious I am missing? Maybe a fuse? I'm stumped so this is my version of phone a friend.