M101 bump stops and shock bushings?

[oddave715]

Anybody have part numbers for the bump stops
or shock bushings from NAPA or other parts house? Or a surplus dealer with these items?

 

[juanprado]

not worth trying to find shock bushings for old school obsolete hydraulic shocks IMHO but the bushings are available as a special order from Monroe.

I would recommend changing the shock and using gas charged. See post below for part numbers

http://www.steelsoldiers.com/showthread.php?97814-Shocks-M101A1-A2-A3-is-there-no-part-available

 

[John Galt]

The shock mounts are 3/4" hourglass x 1 9/16 (2 piece).

I was about to order new shock bushing from here but decided to just replace the shocks.

http://www.energysuspension.com/universal-products/shock-eye-bushings.html

http://www.energysuspensionparts.com/19904

I have put Rancho 5226 and Monroe Coil Overs 58496 on these trailers.

 

[oddave715]

Thanks!

What about bumpstops? My rubbers fell off the metal piece so I have no bumpstops on a trailer.

 

[oddave715]

Anybody have a Toyota Tacoma or Tundra and a M101? Both of those trucks, from my internet searches, have bumpstops that mount the same. Tube diameter is close to the same so spring bolts should be close. Can anybody check a Toyota and give the spring width and distance between ubolts? I'll measure my 101 and post it up when I get back home.