M101 specs please

[ccf460]

I am looking at using a m105 or m101 bed for a project. I have the dimensions for a 105 (in my yard). But cant seem to find reliable measurements for a 101. I am looking for overall length, width, height. Also,most critical, measurement from front lip(forward most edge) to center of wheelwell opening, and inside to inside width between fenders. Thanks ahead. I am building a cucv clone out of a chevy k30 crew cab long bed 4wd, and would like to use a trailer bed.

 

[KsM715]

I got everything but the height (forgot that when I went outside, I'll get it in a few) Overall length is 99.5" (edge of front lip to outside edge of tailgate). Overall width is 73.5" outside edge to outside edge measured at the bottom front of the trailer bed. The inside measurement from wheelwell to wheelwell is 45.5" and the measurment from front lip to the center of the wheel opening is 56.25"

Height is 20" without bows and cover and 51" with.

 

[ccf460]

That sounds like a perfect match for a long bed truck! Do you know off hand if the 1101's are the same?

 

[hwcurtice]

M1101/2 are smaller.

 

[Gunner USN]

Google the following:
m1101 trailer specifications
m101 trailer specifications
m101a1 trailer specifications
m101a2 trailer specifications
m101a3 trailer specifications

 

[ccf460]

I did google them, but mainly all I got was a pic of the data plates that doesn't contain all the info, and seems to vary?

 

[KsM715]

I do not have dimensions for the1101/2

 

[Xfile]

Here are the dimensions/specs for the M1101/M1102 trailers. They are wider than the 101 series. The information came from olive-drab.com. Hope this helps.

Maximum Vehicle Weight	M1101: 3400 lb (1542 kg) M1102: 4200 lb (1905 kg)
Curb Weight	1460 lb ( 662 kg)
Maximum Payload Capacity	M1101: 1940 lb (880 kg) M1102: 2740 lb (1243 kg)
Hull	Unitized body construction using aircraft grade aluminum and chromoly steel
Overall Length	132 inches (335cm)
Overall Width	85.6 inches (217 cm)
Overall Height	52.5 inches (133 cm)
Overall Height w/Soft Top Kit	99.5 inches (253 cm)
Track Width	72.5 inches (184 cm)
Drawbar Length	93.2 inches (237 cm) (from axle center to eye center)
Drawbar Eye Height	29.5 inches (75 cm)
Deck Height	34.5 inches (88 cm)
Ground Clearance (Laden)	16 inches (41 cm)
Suspension Type	Fully independent progressive rate trailing arm suspension
Axle	Tubular steel
Spring Media	Progressive rate torselastic rubber chords
Shock Absorbers	Telescopic, direct acting, one per wheel, HMMWV compatible
Wheels	16.5 X 8.25, two piece steel, HMMWV compatible, 8 on 6.5 inch bolt pattern
Tires	37X12.50R16.5 Goodyear Wrangler M/T, with 30-mile runflat inserts, HMMWV compatible
Brakes	12 inch x 2 inch free backing hydraulic surge brakes with automatic breakaway actuation. Independent lever-operated left and right side mechanical parking brakes.
Electrical System	24 Volt DC sealed lighting system with blackout convoy lights, 12 pin connector plug mates with HMMWV
Max Speed (Primary Roads)	55 mph (88 kph)
Max Speed (Secondary Roads)	35 mph (56 kph)
Max Speed (Off Road)	20 mph (32 kph)
Departure Angle	39 degrees
Turning Angle	80 degrees
Fording	60 inches (152 cm)