M1010 AUX box heater won’t ignite, looking for help or replacement

[OktobrVega]

My heater ran for about 15 mins then stopped on it’s own. I have fuel all the way to the regulator. But seems the regulator does not open allowing fuel to enter the downtube. When I go to START light smoke comes out at first, but it doesn’t ignite. Ive tried everything. Made sure all connections tight. All solder points good. Voltage present. Just at a loss. I’m thinking this unit just may need replacing since I have no idea where to find parts or parts breakdown.

I can’t find the thread where it was mentioned who made these units. Think they mentioned the manual being 100$ something like that. Anyone have that thread saved ?

Also if you have a known working unit get with me on price.

 

[OktobrVega]

Found the tear down for the model 10530A heater.
It starts from 14-35 to 14-51 (pages 635-651) in the
TM 9-2320-280-34 I wish I could find someone who can service the units.

https://www.nsncenter.com/Files/library/TM/HMMWV/TM-9-2320-280-34/TM-9-2320-280-34.pdf


Here’s the thread mentioned if it helps anyone.

https://www.steelsoldiers.com/showthread.php?147220-Troubleshooting-M1010-fuel-fired-heater

 

[Mad Texan]

Found the tear down for the model 10530A heater.
It starts from 14-35 to 14-51 (pages 635-651) in the
TM 9-2320-280-34 I wish I could find someone who can service the units.

https://www.nsncenter.com/Files/library/TM/HMMWV/TM-9-2320-280-34/TM-9-2320-280-34.pdf


Here’s the thread mentioned if it helps anyone.

https://www.steelsoldiers.com/showthread.php?147220-Troubleshooting-M1010-fuel-fired-heater

Very good reference information. Had I had it I might have looked into mine further! Instead...