I've done my best to research online and call various spring shops before resorting to posting my first thread. I've got a 1965 m101a1 with a busted leaf spring. I know finding an original spring in the NJ area isn't likely and definitely not going to be cheap. Does anyone know if there's a suitable new replacement I could purchase since I'm doing a 5200lb dexter axle swap anyway? Finding a 7 leaf, 2" wide by 46" eye to eye spring is a lot harder than I thought. Any and all information is greatly appreciated.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
m101a1 Leaf Spring
- Thread starter TeeWhy
- Start date
- 4,290
- 1,776
- 113
- Location
- Edmond, Oklahoma
Dexter and Redline should have springs to fit.
Did you already look up the part number in the TM?
That number should cross reference to a new number.
If not, Just carry your good spring down to any decent trailer parts store and match it up.
They can measure the old one and match it to a new part number.
Croft Trailer has excellent customer service if you’re never used them before.
www.crofttrailer.com
Whatever you find, please post part numbers, etc.
Good Luck.
Did you already look up the part number in the TM?
That number should cross reference to a new number.
If not, Just carry your good spring down to any decent trailer parts store and match it up.
They can measure the old one and match it to a new part number.
Croft Trailer has excellent customer service if you’re never used them before.
www.crofttrailer.com
Whatever you find, please post part numbers, etc.
Good Luck.
- 2,102
- 30
- 38
- Location
- Delta Junction, Alaska
Which leaf is it? If its not the top one, it should be easier to find, and a longer one can be shortened to fit. Also the hole for the spring center bolt is sometime not centered between the eyes. If your replacing a leaf, get a new spring center bolt too.
I noticed there were two TM posted so I looked at the second one and hopefuld NSN 2510-01-353-3116. I'll give Dexter or Croft a call on Monday and see what they can do for me. Unfortunately, it was the top spring that snapped so I'll most likely replace both sets with new springs depending on price.
